FRETS.NET

John's Discussions (337)

Discussions Replied To (309) Replies Latest Activity

"Sorry Paul I have a couple of school programs up north that I support with this kind…"

John replied Nov 17, 2011 to Bridge Saddle & Nut Materials

40 Nov 21, 2011
Reply by Hesh Breakstone

""if you have plenty of cheap time and cost is not a factor I suppose high quality bo…"

John replied Nov 17, 2011 to Bridge Saddle & Nut Materials

40 Nov 21, 2011
Reply by Hesh Breakstone

"I'm good at what I do and I'm busy, so for me, contrary to what Rusty says, bone is…"

John replied Nov 15, 2011 to Bridge Saddle & Nut Materials

40 Nov 21, 2011
Reply by Hesh Breakstone

"I've taught a number of people how to make a nut over the years. Bottom line, some n…"

John replied Nov 14, 2011 to Bridge Saddle & Nut Materials

40 Nov 21, 2011
Reply by Hesh Breakstone

"I replace TUSQ with bone on a regular basis I can't think of a time I've replaced bo…"

John replied Nov 13, 2011 to Bridge Saddle & Nut Materials

40 Nov 21, 2011
Reply by Hesh Breakstone

"The 12 strings have the octave string on the bottom so that's a big thing, tailpiece…"

John replied Nov 12, 2011 to Thoughts on the " Rickenbacher " tone....How much was the pickup , and how much was the guitar ?

4 Nov 12, 2011
Reply by Josh Fuller

"I usually loosen the strings, lift the saddle and pull to the side. I use pliers if…"

John replied Nov 11, 2011 to How can I remove the saddle without removing the strings?

10 May 20, 2014
Reply by Ron frazier

"There are 2 lawyers that would be good to have on your side as a guitar tech a Murph…"

John replied Nov 6, 2011 to guitar action, how low is too low?

6 Nov 24, 2011
Reply by Ron Frazier

"You could do the Nashville high strung tuning on an archtop and then make sure you h…"

John replied Nov 6, 2011 to I2 string arch tops.....Why don't I see any....Can a 6 string stand the conversion ?......Discuss...

13 Oct 1, 2015
Reply by Punto Bawono

"I'd glue that piece back put on light gauge strings and keep an eye on it. The guita…"

John replied Nov 5, 2011 to Yamaha FG-230 12 string bridge plate

8 Nov 8, 2011
Reply by Tim Mace

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service