FRETS.NET

jeff henry's Discussions (15)

Discussions Replied To (11) Replies Latest Activity

"I'm away from the shop today so I'll have to wait til Monday to see what's going on…"

jeff henry replied Oct 10, 2009 to Gibson A2 neck reset

15 Oct 14, 2009
Reply by Ned Knepp

"Thanks for responding. Neck is pulling up. Other than that the mandolin is in good c…"

jeff henry replied Oct 10, 2009 to Gibson A2 neck reset

15 Oct 14, 2009
Reply by Ned Knepp

"Thanks for feedback. I 'll have to consider my options, and of course, what my custo…"

jeff henry replied Oct 10, 2009 to Gibson A2 neck reset

15 Oct 14, 2009
Reply by Ned Knepp

"As far as I can tell the box is structurally sound. The neck joint appears to have c…"

jeff henry replied Oct 10, 2009 to Gibson A2 neck reset

15 Oct 14, 2009
Reply by Ned Knepp

"Didn't attempt the reset after your feedback. Thanks! I was able to apply minimal pr…"

jeff henry replied Oct 8, 2009 to Takamine neck reset

4 Oct 8, 2009
Reply by jeff henry

"Thanks for the advice, Paul. I think I'll give that a try. With this guitar, I don't…"

jeff henry replied Oct 2, 2009 to Takamine neck reset

4 Oct 8, 2009
Reply by jeff henry

"Thanks for the photo Mike. I'm nervous about heating the finish on the heel that muc…"

jeff henry replied Sep 2, 2008 to Guild mortise/tenon neck reset

16 Sep 2, 2008
Reply by Greg Mirken

"Thanks for your responses. I considered sawing the neck, but discussed it with the o…"

jeff henry replied Sep 2, 2008 to Guild mortise/tenon neck reset

16 Sep 2, 2008
Reply by Greg Mirken

"Thanks for all the feedback fellers. I think I may give the heat lamp a go and see…"

jeff henry replied Aug 31, 2008 to Guild mortise/tenon neck reset

16 Sep 2, 2008
Reply by Greg Mirken

"No pins, but thanks for the advice. May have to get creative with this repair."

jeff henry replied Aug 29, 2008 to Guild mortise/tenon neck reset

16 Sep 2, 2008
Reply by Greg Mirken

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service