FRETS.NET

Robert Sherman's Discussions (11)

Search Forum

View

Discussions Replied To (9) Replies Latest Activity

"Yes. The problem was opposite what I had thought. There was a wide gap between the n…"

Robert Sherman replied Sep 28, 2019 to Neck reset on Gallagher

 4 Sep 28, 2019
Reply by Robert Sherman

"Thank you for directing me to the video.  It was indeed a dovetail and with a little…"

Robert Sherman replied Sep 23, 2019 to Neck reset on Gallagher

 4 Sep 28, 2019
Reply by Robert Sherman

"Something that I should have asked first about this neck problem.... What is the pur…"

Robert Sherman replied Dec 7, 2010 to What would you do?

 16 Dec 8, 2010
Reply by Tim Mace

"I still think it would be fine with horizontal grain. Mahagany is a very stable wood…"

Robert Sherman replied Dec 7, 2010 to What would you do?

 16 Dec 8, 2010
Reply by Tim Mace

"So, is the problem that you have no table saw with which to cut a trussrod channel?…"

Robert Sherman replied Dec 6, 2010 to What would you do?

 16 Dec 8, 2010
Reply by Tim Mace

"I don't know if an anti-static cling spray like Bounce would work on guitars, but if…"

Robert Sherman replied Dec 4, 2010 to Pickguard Static

 6 Dec 5, 2010
Reply by Brady Anderson

"Can the LMI bridge plate blankets survive the clamping pressure to flatten a warped…"

Robert Sherman replied Dec 3, 2010 to Removing Aliphatic Glue

 6 Dec 3, 2010
Reply by FRANK

"I've seen that with Fenders. Static builds up and then crackles audibly as it discha…"

Robert Sherman replied Dec 3, 2010 to Pickguard Static

 6 Dec 5, 2010
Reply by Brady Anderson

"Thanks Mark, that's a relief. I just want to remove the bridge plate and get the top…"

Robert Sherman replied Dec 3, 2010 to Removing Aliphatic Glue

 6 Dec 3, 2010
Reply by FRANK

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service