Hohner HG340 neck joint question
Hohner HG340: Anyone have any practical experience with this production neck / body joint. Tradition dovetail, mortise & tenon or butt and dowel?
I’m working on a guitar that was improperly repaired before my friend purchased it in 2010. No history available on the poor repair. And it has sat after repair estimates were well beyond its value.
I’m taking it on as a learning opportunity.
At this point the neck is going to have to come off to be able to correct some compression damage to the neck block and the missmanaged repair.
Any hands on experiences would be greatly appreciated.
I’m working on a guitar that was improperly repaired before my friend purchased it in 2010. No history available on the poor repair. And it has sat after repair estimates were well beyond its value.
I’m taking it on as a learning opportunity.
At this point the neck is going to have to come off to be able to correct some compression damage to the neck block and the missmanaged repair.
Any hands on experiences would be greatly appreciated.
Views: 47
© 2025 Created by Frank Ford.
Powered by
