FRETS.NET

Hot rod adjustable truss rod @ Stewmac for a Danelectro DC Bass

Hi...

I have to install a truss rod (adjustment at heel) in a Danelectro DC bass neck. It's 21 frets and 34'' scale. I'd like to install a double action truss rod. I'd like to install a Stewmac hot rod adjustable truss rod... which one do you suggest?

Thank you for your help

Views: 284

Reply to This

Replies to This Discussion

The long rod with the 4mm end adjuster is probably your best choice of the "hot rod" series  - these rods should be checked for dimensions as they are a very deep rod when compared to the LMI TRED rod  (www.lmii.com) rod which I favor over the hot rod units because of superior design and dimensions.

Rusty.

+1 for the LMI rod. Also you could look at the Allied Lutherie double action bass guitar rod.  (http://www.alliedlutherie.com/truss_rods.htm)

Cal

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service