Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Happy Halloween, everyone!Started by Mike Kolb in Luthier Talk |
1 |
Oct 31, 2015 Reply by Frank Ford |
Taylor GS Mini - too small for an everyday guitar?Hi my friends. I've been toying with the idea of getting a Taylor GS Mini and using it as my main guitar. I have tried them out at Guitar C… Started by Arthur Sweeney in Luthier Talk |
22 |
Oct 30, 2015 Reply by Arthur Sweeney |
69 N-20- Classical internal picturesTrying to replace missing top on one so need some good digital pictures from inside a N-20.Hoping someone has some pictures they can post a… Started by Rob in Luthier Talk |
3 |
Oct 30, 2015 Reply by Thomas James |
Question about neck angle on Taylor Big BabyHi ! I have a new Taylor Big Baby. The action is OK (3.5/32 inch low E and 2.5/32inch high E) but I noticed that the saddle has been cut a… Started by Gerardo Pavone in Luthier Talk |
7 |
Oct 30, 2015 Reply by Hesh Breakstone |
Is it ok to use the truss rod to lower action?I have read on guitar forums both yes and no. Some say it is ok to make minor neck adjustments with the truss rod to lower action, while ot… Started by Arthur Sweeney in Luthier Talk |
5 |
Oct 30, 2015 Reply by Hesh Breakstone |
Vintage Washburn Neck re-set issueHi Folks, I've been focussing recently on restoring turn of the century Washburn Parlor guitars. I just completed a long on going project,… Started by Chris Vallillo in Luthier Talk |
4 |
Oct 27, 2015 Reply by Chris Vallillo |
Vintage Tuning MachinesI'm working on a customer's turn-of-of-the-20th century guitar. It's not labeled, but it is stamped on the back of the slotted peghead with… Started by Glenn Freese in Luthier Talk |
7 |
Oct 24, 2015 Reply by Glenn Freese |
Can anyone help me diagnose this sound?Hi folks - I've had this sound on a couple acoustics i've owned, and it's a deal killer. Any ideas what causes it and anything that can be… Started by Rob sutherland in Luthier Talk |
4 |
Oct 24, 2015 Reply by J R Emmett |
Archtop pickup questionI am just finishing up an archtop guitar that is a bit of an experiment, and am thinking of what kind of pickup would best suit it. The gu… Started by Brian Evans in Luthier Talk |
1 |
Oct 24, 2015 Reply by Brian Evans |
Cuatro bridge questionI'm working on a Puerto Rican quatro for a customer, doing a refret and getting it all set up, and the bridge is baffling me. Instead of be… Started by Ian Pender in Luthier Talk |
9 |
Oct 24, 2015 Reply by Brian Evans |
© 2026 Created by Frank Ford.
Powered by
