Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Need some help finding parts for National Resonator MandolinHello All, I have a National resonator mandolin in the shop for some things and I'm at a loss as to where I might find some parts.... I do… Started by Justin in Luthier Talk |
3 |
Sep 5, 2012 Reply by Paul Hostetter |
Removing scratches on an ebony boardWhat's the best way to remove scratches left by utility knife, the customer was using to remove crud where frets sit on the board. It's pur… Started by tadej bratkovic in Luthier Talk |
11 |
Sep 4, 2012 Reply by tadej bratkovic |
String Ball endsFirst I would like to say hi, I havent posted on here in a while.Been following the freebie cheepie tools. Actually used on of the sugges… Started by lonnie james barber in Luthier Talk |
14 |
Sep 2, 2012 Reply by lonnie james barber |
Gibson A4 heel crack advice needed on best way to repairI recently picked up a Gibson A4 cheaply. Serial number is unreadable but factory order number is 11120 making it about 1918. The neck loo… Started by Mike Keen in Luthier Talk |
7 |
Sep 1, 2012 Reply by Tim Mace |
Casino fret wire?Hi everyone, just joined the forum so making a first post. I repair fretted instruments in the Manchester area in England, also make a few… Started by Glen Havelock in Luthier Talk |
3 |
Aug 31, 2012 Reply by Gregory Hites |
Using an Arbor Press for frettingI've already got a 1-ton arbor press that I'd like to use for press-fitting frets. I was going to order Stew-Mac's arbor press caul, but no… Started by Larry Schultz in Metalworking, Machining, Tool & Fixture Making for Luthiers |
23 |
Aug 29, 2012 Reply by Dan Pennington |
Can I tune a tenor banjo like a mandolin ?Hey guys I am In need of a answer from a mandolin banjo expert can I tune a tenor banjo like a mandolin ? is there a need for change in gau… Started by FRANK in Luthier Talk |
13 |
Aug 28, 2012 Reply by Allen L Wall |
Finish Crack Touch UpI have performed many finish touch ups with great success, but this one makes me a little nervous. I have a Martin OM-28 on my bench with a… Started by Philip Secrist in Luthier Talk |
3 |
Aug 28, 2012 Reply by Eric Steven Johansen |
Gibson Chet CECHi I am looking for a Sound Hole Cover for a Gibson Chet Atkins CE or CEC. Any ideas where I might find one. I would even buy the complete… Started by Fred Dixon in Luthier Talk |
0 | Aug 27, 2012 |
Tuner Hole CracksGreetings, I'm working on an early 60's Epiphone with cracks running through the tuner holes. I made some tapered dowels to spread the… Started by Gregory Hites in Luthier Talk |
11 |
Aug 26, 2012 Reply by Randall Curtis Bowman |
© 2026 Created by Frank Ford.
Powered by
