Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Re-Hydrating a Classical guitarPleased to present for your consideration. . . . . . . . . I just picked up a interesting Union Musical Espanola classical guitar at the G… Started by John Yungbluth in Luthier Talk |
6 |
Apr 7, 2018 Reply by John Yungbluth |
Can a thread be saved as a draft?Is saving a draft an option here? ( Picture related ) Started by Redacted in Luthier Talk |
2 |
Apr 6, 2018 Reply by Glen H |
Set Neck to Bolt On ConversionWhat do you think of this? I know that this is a controversial subject. I have never done it and would not consider it except that this gui… Started by John Gibson in Luthier Talk |
7 |
Apr 5, 2018 Reply by Roger Häggström |
how to clean a contaminated seam, before regluing?I have in, for repairs, a '73 LoPrinzi dread. It's in my category of 'most neglected' guitars, for a number of reasons. One issue is an ope… Started by Dave Richard in Luthier Talk |
10 |
Apr 4, 2018 Reply by Dave Richard |
Nut cutI'm always looking for better methods, sometimes it's a big change and sometimes a small one. Previously I used a small angle hook to make… Started by Roger Häggström in Luthier Talk |
7 |
Mar 30, 2018 Reply by Andrew |
Frank Ford, can I still buy a CD?I remember seeing that option in the past, is it still available? Started by Bill Krzton in Luthier Talk |
0 | Mar 29, 2018 |
Posting PhotosGreetings Folks How do you post photos with a question? I have a question and seeing would help explain a lot. Thanks Started by Allen L Wall in Luthier Talk |
3 |
Mar 29, 2018 Reply by Andrew |
Need to find a good nickel plating service, for vintage partsDoes anyone know of one, who will do small quantities? I have a '34 Epiphone archtop project: the original tailpiece has lost all of it's n… Started by Dave Richard in Luthier Talk |
5 |
Mar 28, 2018 Reply by Dave Richard |
Fast and dirty wood repairs.fi.jpg Started by Kerry Krishna in Luthier Talk |
4 |
Mar 19, 2018 Reply by Paul Breen |
The little "finds" are the best.I've always casually wondered where someone could get brad-point drills under 1/8" (as the need would arise from time to time). Then, a w… Started by Mike Kolb in Luthier Talk |
2 |
Mar 18, 2018 Reply by Robbie Collins |
© 2026 Created by Frank Ford.
Powered by
