FRETS.NET

Jeff Highland's Discussions (324)

Discussions Replied To (319) Replies Latest Activity

"Just a regular small round washer between the nut and the existing half moon"

Jeff Highland replied Jan 23, 2014 to Clamping a neck into a back-bow

24 Feb 5, 2014
Reply by eliya

"If, as you have suggested, you are intending to refret, this will also give you an o…"

Jeff Highland replied Jan 23, 2014 to Clamping a neck into a back-bow

24 Feb 5, 2014
Reply by eliya

"You will still need the extra washer with this method if the nut has come to the end…"

Jeff Highland replied Jan 23, 2014 to Clamping a neck into a back-bow

24 Feb 5, 2014
Reply by eliya

"Yeah Bugger But look on the bright side, you can pull the braces now and fix it and…"

Jeff Highland replied Jan 23, 2014 to Ill-tempered backs!

14 Jan 25, 2014
Reply by Mac McElwain

"Unfortunately a glued up back which becomes concave is telling you it's history, tha…"

Jeff Highland replied Jan 22, 2014 to Ill-tempered backs!

14 Jan 25, 2014
Reply by Mac McElwain

"An extra washer gives you another turn or two before you come to a stop and gives th…"

Jeff Highland replied Jan 22, 2014 to Clamping a neck into a back-bow

24 Feb 5, 2014
Reply by eliya

"When you say the truss rod is maxed out, is it coming up to a hard stop (running out…"

Jeff Highland replied Jan 22, 2014 to Clamping a neck into a back-bow

24 Feb 5, 2014
Reply by eliya

"Only to remove the braces and rebrace at a lower Relative Humidity. What is the RH n…"

Jeff Highland replied Jan 22, 2014 to Ill-tempered backs!

14 Jan 25, 2014
Reply by Mac McElwain

"The problem with a heat gun is that along with the heat, you are delivering a high a…"

Jeff Highland replied Jan 20, 2014 to How hot is too hot?

6 Jan 21, 2014
Reply by Hesh Breakstone

"I'll assume you are talking separate fretboard. A curved channel is quite simple on…"

Jeff Highland replied Jan 12, 2014 to curved truss rod routing?

6 Jan 12, 2014
Reply by Micha Schellhaas

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service