FRETS.NET

David Houchens's Discussions (163)

Search Forum

View

Discussions Replied To (143) Replies Latest Activity

"Ned, Thats most generous of you. My main concern is the placement of the X brace. I…"

David Houchens replied Nov 14, 2009 to 12 Fret Dreadnought Plans

 7 Nov 15, 2009
Reply by Ned Knepp

"Stewart McDonald sells oversized pins for bridges with holes that are wallowed out a…"

David Houchens replied Oct 28, 2009 to Sources for ABG bridge pins?

 8 Oct 30, 2009
Reply by Mike Kolb

"Titebond isn't going to work after CA either. If I was going to fill it, I would be…"

David Houchens replied Oct 27, 2009 to Dreadnaught project / Back seam

 5 Oct 27, 2009
Reply by David Houchens

"Dave, Very nice guitar. Ned, Something else I was told once that made sense to me wa…"

David Houchens replied Oct 26, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"Dave,I brace mine in a 25 ft radius form so it starts life with a belly(not as big a…"

David Houchens replied Oct 26, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"Ned, I did scallop the X brace and the one tone bar. I put one small brace off each…"

David Houchens replied Oct 24, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"Ned, I couldn't find plans for a single O, but I had a template for single O top/bac…"

David Houchens replied Oct 23, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"Thanks Steve. Its sprayed nitro. I sand them out to 2500 grit, then buff them out wi…"

David Houchens replied Oct 23, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"This one turned out 9 5/8 upper and 13 5/8 lower. I went to Cedar Creek in Oilville,…"

David Houchens replied Oct 23, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

"Thanks Donald. I really like Brazilian. I have a few more sets. Now I can't decide w…"

David Houchens replied Oct 23, 2009 to Little guitars

 32 Oct 26, 2009
Reply by David Payne

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service