FRETS.NET

Russell Vance's Discussions (1,232)

Discussions Replied To (1220) Replies Latest Activity

"Yep, the points on the isolation feet of the turntables and amplifiers etc are desig…"

Russell Vance replied Jun 21, 2014 to Set Screws, Cup Point vs. Flat Point

9 Jul 23, 2014
Reply by Robbie Collins

"I second that:   gone are the days of a lazy couple of hours researching 'interestin…"

Russell Vance replied Jun 20, 2014 to Carbon fiber refret

7 Jun 24, 2014
Reply by Alex Glasser

"Sorry Ron...already know where there are heap of them:  When I first started this jo…"

Russell Vance replied May 20, 2014 to How To Ruin A Luthier's Day...

10 May 20, 2014
Reply by Russell Vance

"Hi Gregory, I just reviewed my post and apologize for the gruff manner - it wasn't m…"

Russell Vance replied May 18, 2014 to Clapton Mid Boost Mod

11 May 20, 2014
Reply by Gregory Hites

"What John said, I've done a few of these and they are all loud.  I recall we had a w…"

Russell Vance replied May 17, 2014 to Clapton Mid Boost Mod

11 May 20, 2014
Reply by Gregory Hites

"Yep, you can and it also provides some stand-off between the edge of the sound hole…"

Russell Vance replied May 13, 2014 to How do you mask the soundhole?

15 May 20, 2014
Reply by Paul Verticchio

"Nick - I strongly advise covering both surfaces with Titebond, so does Franklin who…"

Russell Vance replied May 12, 2014 to any tips on multi-laminate gluing preparation ??

23 May 29, 2014
Reply by Ned Knepp

"Hi Nick, Ok, I'll assume resources limited to a bunch of speed clamps or similar.  …"

Russell Vance replied May 12, 2014 to any tips on multi-laminate gluing preparation ??

23 May 29, 2014
Reply by Ned Knepp

"Titebond III has a higher creep factor than TB original - it is not suitable for gen…"

Russell Vance replied May 11, 2014 to any tips on multi-laminate gluing preparation ??

23 May 29, 2014
Reply by Ned Knepp

"Nick - send a photo/image so we can get some basic orientation - that'll help.   Tel…"

Russell Vance replied May 11, 2014 to any tips on multi-laminate gluing preparation ??

23 May 29, 2014
Reply by Ned Knepp

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service