FRETS.NET

Roger Häggström's Discussions (582)

Discussions Replied To (536) Replies Latest Activity

"One can wonder! A caul in hard plastic instead of brass is interesting. Never seen a…"

Roger Häggström replied Jan 21, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Another Swede has made something too :-) http://guitarworks.thestrandbergs.com/2012/…"

Roger Häggström replied Jan 20, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Making a one-size-fits-all adjustable caul is aiming for too much I think. Unless th…"

Roger Häggström replied Jan 19, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Both similar and different :-) The magnet trick was nice!"

Roger Häggström replied Jan 18, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Just a few last notes in this dying thread.Even with a very low nut and a perfect se…"

Roger Häggström replied Jan 18, 2017 to Nut compensation

64 Jan 18, 2017
Reply by Roger Häggström

"Made the slot in the Jaws2 1 mm deeper with a hack saw. Put 2,5 mm thick leather as…"

Roger Häggström replied Jan 18, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Interesting! Lots of caul changing though. Yes, I know that what I've come up with i…"

Roger Häggström replied Jan 18, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"The way you do it 1-3 is a great way. I've been fighting against the 2 and 3 method…"

Roger Häggström replied Jan 17, 2017 to Nut action

12 Jan 22, 2017
Reply by Hesh Breakstone

"The 1st fret action is not as critical as the 12th fret action. To get a buzz on the…"

Roger Häggström replied Jan 17, 2017 to Nut action

12 Jan 22, 2017
Reply by Hesh Breakstone

"Tried it out, the not so good 20" one. Turned out great! Probably the best fitting f…"

Roger Häggström replied Jan 17, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service