FRETS.NET

Robert Bander's Discussions (28)

Discussions Replied To (24) Replies Latest Activity

"That's got to be it (confirmed by a third source). The joint is inset into the body.…"

Robert Bander replied Oct 28, 2010 to Neck Removal, Conn 12 String

22 Dec 20, 2014
Reply by John Yungbluth

"This former Eugene resident is interested. musales@aol.com"

Robert Bander replied Oct 27, 2010 to Guitar Repair Job Opening In Portland, OR

3 Oct 27, 2010
Reply by Jeffrey L. Suits

"I didn't quite get your drift"

Robert Bander replied Oct 7, 2010 to Any 'easy' way to cut nice, thin, clean splines for filling cracks due to top shrinkage ?

5 Oct 7, 2010
Reply by Robert Bander

"Thanks David, I'll have to work on my burn in knife technique. I have only used a pa…"

Robert Bander replied Oct 7, 2010 to Steel String Bridge Reglue

10 Oct 7, 2010
Reply by Chad VanRens

"I see, so by using the white protective sheets, you raise up the router base, giving…"

Robert Bander replied Oct 7, 2010 to Steel String Bridge Reglue

10 Oct 7, 2010
Reply by Chad VanRens

"I've been using scrap top wood, and cutting off a piece the thickness of a saddle bl…"

Robert Bander replied Oct 6, 2010 to Any 'easy' way to cut nice, thin, clean splines for filling cracks due to top shrinkage ?

5 Oct 7, 2010
Reply by Robert Bander

"Thanks Chad, That's good to know about the perimeter finish. I had no idea. I'm goin…"

Robert Bander replied Oct 6, 2010 to Steel String Bridge Reglue

10 Oct 7, 2010
Reply by Chad VanRens

"Thanks, I'll research it."

Robert Bander replied Oct 6, 2010 to Steel String Bridge Reglue

10 Oct 7, 2010
Reply by Chad VanRens

"Thanks very much Paul !"

Robert Bander replied Sep 3, 2010 to Startocaster, bridge pickup problem

14 Sep 4, 2010
Reply by Paul Verticchio

"Thanks everyone for all the tips. In a former life I wrote maintenance manuals for t…"

Robert Bander replied Sep 2, 2010 to Startocaster, bridge pickup problem

14 Sep 4, 2010
Reply by Paul Verticchio

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service