FRETS.NET

Greg Smith's Discussions (12)

Discussions Replied To (11) Replies Latest Activity

"Antonio, It's a good idea. My Godin, which is over 15 years old, has an early-versi…"

Greg Smith replied Jul 22, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"I thought about widening the slot and putting in a fatter saddle But even that appro…"

Greg Smith replied Jul 19, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Thanks. We'll find out how it sounds plugged soon. Under-saddle pickups aren't very…"

Greg Smith replied Jul 19, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Finally got around to trying my idea: http://www.stanford.edu/~gmsmith/saddle/compe…"

Greg Smith replied Jul 18, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Bob, Looks like: 322 1/3 mm from nut to crown of 12th fret. 322 mm from crown of 1…"

Greg Smith replied Mar 12, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Len, Thanks. Don't know why the nut is so high on CGs. I just know that the action…"

Greg Smith replied Mar 12, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Bob, Can't post pictures right now, but here are some measurements: 25 3/8" string…"

Greg Smith replied Mar 12, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Mark, Thanks for the suggestion. I've been reading about nut adjustments for intona…"

Greg Smith replied Mar 11, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Bob, My drawing is pretty rough. I did intend to have a rolloff on the back side of…"

Greg Smith replied Mar 11, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Russell, After two thumbs-down for the Multiac I'm starting to realize why I've nev…"

Greg Smith replied Mar 11, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service