FRETS.NET

Henry Ramsey's Discussions (13)

Search Forum

View

Discussions Replied To (12) Replies Latest Activity

"Sure, I know I can get a 1/8" allen wrench, but using a 4mm allen wrench is what got…"

Henry Ramsey replied Oct 8, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I'm thinking they misunderstood my question or only answered part of it.  The adjust…"

Henry Ramsey replied Oct 8, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I think it's OK.  The threads don't seem to be damaged so I can use a new nut withou…"

Henry Ramsey replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"Well, I tried cross-slotting it and though it worked at first I got to a point where…"

Henry Ramsey replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I look forward to attempting to remove the fingerboard like I look forward to having…"

Henry Ramsey replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"There would still be the hole that I used to remove the nut the first time so if it…"

Henry Ramsey replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"Forget what I said abut the inside measurments.  I must be reading it wrong or I wro…"

Henry Ramsey replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I cannot get the caliper into the neck far enough to measure the threads on the rod.…"

Henry Ramsey replied Oct 6, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"You are correct. This nut might very well be metric.   The StewMac fender bullet tru…"

Henry Ramsey replied Oct 5, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I got the truss rod nut out with a screw extractor.  Hooray! The truss rod also pull…"

Henry Ramsey replied Oct 4, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service