FRETS.NET

Magnus Hultin's Discussions (101)

Discussions Replied To (96) Replies Latest Activity

"Doug, Not having seen Kens pictures, I assumed the pinholes to be in a slightly low…"

Magnus Hultin replied Sep 23, 2008 to Saddle slot depth?

10 Sep 25, 2008
Reply by Doug Collins

"Ken, I started on a reply earlier today but got tied up with other stuff. I now not…"

Magnus Hultin replied Sep 23, 2008 to Saddle slot depth?

10 Sep 25, 2008
Reply by Doug Collins

"Or, why not use a thin piece of mahogany, to avoid a white spot...., and a drop of l…"

Magnus Hultin replied Sep 21, 2008 to Leaving Strap Button Hole Open

3 Sep 21, 2008
Reply by Frank Ford

"I was given a paper sheet with this picture by a guitar repair guy in Gothenburg a f…"

Magnus Hultin replied Sep 21, 2008 to Plastic washers on tuners.

4 Sep 21, 2008
Reply by Matthew Koyle

"I have been advised by several, with far more experience that I have, that You shall…"

Magnus Hultin replied Sep 20, 2008 to Need some truss rod advise

4 Sep 21, 2008
Reply by Frank Ford

"When I started fixing up guitars, which I do as a hobby, I was recommended to do exa…"

Magnus Hultin replied Sep 19, 2008 to Nut glue

6 Sep 19, 2008
Reply by Martin Edwards

"What is it, a TS-4 or a TS-5...? Until about a year ago I had one of each, but sold…"

Magnus Hultin replied Sep 17, 2008 to Dovetail to Bolt-on conversion

10 Sep 17, 2008
Reply by Magnus Hultin

"Larry, The pictures I mentioned. A Goya M-24 froom late 50:s, this is the only one…"

Magnus Hultin replied Sep 17, 2008 to odd guitar scale length

7 Sep 17, 2008
Reply by Magnus Hultin

"I have never dismounted a G-10, but I am pretty shure it is a dovetail. What You see…"

Magnus Hultin replied Sep 17, 2008 to odd guitar scale length

7 Sep 17, 2008
Reply by Magnus Hultin

"Larry, If You take 24,7 multiplied by 25,4 (one inch in mm) You get 627,4. 630 divi…"

Magnus Hultin replied Sep 16, 2008 to odd guitar scale length

7 Sep 17, 2008
Reply by Magnus Hultin

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service