FRETS.NET

Lee Gendvilas's Discussions (229)

Search Forum

View

Discussions Replied To (180) Replies Latest Activity

"Hi Ned, I also agree with Hesh, well said."

Lee Gendvilas replied May 4, 2016 to Hi from a newb , and a 100 questions for a five string build

 29 May 17, 2016
Reply by Russell Kingery

"Thanks for your replies! I'm going to double check the nut slots and string height a…"

Lee Gendvilas replied May 4, 2016 to Martin D-1 R bridge

 15 May 7, 2016
Reply by Lee Gendvilas

"Hello again. I would like to sincerely thank Mark, Len, Andrew, Skip, Frank and Hesh…"

Lee Gendvilas replied May 3, 2016 to Martin D-1 R bridge

 15 May 7, 2016
Reply by Lee Gendvilas

"Hello Frank. Than -you for replying. I went to Rocker and found a small piece of Pau…"

Lee Gendvilas replied May 2, 2016 to Martin D-1 R bridge

 15 May 7, 2016
Reply by Lee Gendvilas

"Here's a pic."

Lee Gendvilas replied Mar 3, 2016 to endgrain on mandolin headstock

 6 Mar 4, 2016
Reply by Kerry Krishna

"Hi Charley, thank-you for your reply. Yes, it is a plate covered back."

Lee Gendvilas replied Mar 3, 2016 to endgrain on mandolin headstock

 6 Mar 4, 2016
Reply by Kerry Krishna

"Hello again Rusty. Thanks for taking the time to reply! Great information and very h…"

Lee Gendvilas replied Feb 16, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"Hi Rusty. This discussion has been a great read. Since I'm still in the beginning st…"

Lee Gendvilas replied Feb 15, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"I did as Frank suggested on a guitarron with a similar crack/break, but I could open…"

Lee Gendvilas replied Dec 12, 2015 to Repairing an already tight crack? What to do?

 5 Dec 12, 2015
Reply by Craig C.

"Here's what I found. A little pricey? I bought  Ripsaw Blade w/Mandrel Set, 1-1/4" D…"

Lee Gendvilas replied Dec 5, 2015 to JIG FOR MAKING NARROW STRIPS OF BINDING

 12 Dec 5, 2015
Reply by George Roberts

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service