FRETS.NET

Jack Lord's Discussions (96)

Search Forum

View

Discussions Replied To (69) Replies Latest Activity

"Please do post the pictures Donald. Not to be too picky, but I would not drill an en…"

Jack Lord replied Aug 27, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"One more thing Donald, before I begin to route the slot, I drill a hole with the rou…"

Jack Lord replied Aug 26, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"Donald - If you plan on buying a router, I recommend the Bosch Colt, available at Lo…"

Jack Lord replied Aug 25, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"Thank you Mike, I'm flattered. Here's a better overall view. Nothing fancy, it's bas…"

Jack Lord replied Aug 25, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"I'm not sure you'll get the RPM you need."

Jack Lord replied Aug 24, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"I use a pin router setup. Keep the router stationary and slide the bridge blank. I z…"

Jack Lord replied Aug 23, 2010 to Need a fixture

 22 Aug 29, 2010
Reply by Gregory Hites

"I like the idea of of blistering the finish. After my failure to remove it all by sc…"

Jack Lord replied Aug 20, 2010 to Removing finish under the bridge

 12 Aug 20, 2010
Reply by Jack Lord

"I can't believe it, I thought I had scraped it well, bought fresh Titebond (1-1/2 mo…"

Jack Lord replied Aug 17, 2010 to Removing finish under the bridge

 12 Aug 20, 2010
Reply by Jack Lord

"Howard - You pare rather than scrape? Doesn't the handle get in the way? Or did you…"

Jack Lord replied Aug 13, 2010 to Removing finish under the bridge

 12 Aug 20, 2010
Reply by Jack Lord

"I've never developed much of a technique, just carefully apply the stripper with an…"

Jack Lord replied Aug 13, 2010 to Removing finish under the bridge

 12 Aug 20, 2010
Reply by Jack Lord

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service