Tom Burgess's Discussions (7)

View

Discussions Replied To (6)	Replies	Latest Activity
"AHA! =D IF I understand correctly, you use the modified saw blade (same thickness a…" Tom Burgess replied Aug 17 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess
"Thank you, John, for your excellent suggestion regarding indexing the fretboard (two…" Tom Burgess replied Aug 16 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess
"Thank you, Mark, for the link to the first UMGF thread. Very helpful, and you made…" Tom Burgess replied Aug 16 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess
"Q1. I missed out on that Yamaha "crash test dummy" but it's for the best. Q2. I foun…" Tom Burgess replied Aug 16 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess
"Carl Dickenson wrote:Yes, a shim would be fine but I think hardwood veneer glued to…" Tom Burgess replied Aug 16 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess
"Carl and Roger and Mark, Thank you for your helpful replies. I've read each of them…" Tom Burgess replied Jul 26 to Bolt-on Neck Conversion - Sawn right through the fretboard at Fret 14	11	Aug 17 Reply by Tom Burgess

Members