FRETS.NET

steven gallagher's Discussions (58)

Discussions Replied To (55) Replies Latest Activity

"What's the action at the 12th fret? .002 at the next fret seems way too low."

steven gallagher replied Mar 21, 2017 to Buzzing/sitar sound after refret and fret level

4 Mar 22, 2017
Reply by Roger Häggström

"On Windows, Num Lock Key On, hold down Alt key, type 0174 on the numeric keypad. ®®®"

steven gallagher replied Jan 30, 2017 to Getting back on my feet & a semi hollow Rickenbacher knockoff.

10 Jan 31, 2017
Reply by Paul Breen

"Paul, At the top of this page is a banner that says, "A Meeting Place for Instrument…"

steven gallagher replied Jan 30, 2017 to A cure looking for a problem?

39 Jan 31, 2017
Reply by Roger Häggström

"A compound radius fretboard is just as "circular" as a fixed radius fb. It's just th…"

steven gallagher replied Jan 16, 2017 to Better Jaws2

33 Feb 5, 2017
Reply by Walter W Wright

"A compound radius, which really means a conical section, is the only way to get all…"

steven gallagher replied Jan 14, 2017 to Relly low action

5 Jan 14, 2017
Reply by steven gallagher

"You mentioned you had a custom sanding beam made with relief built in. I don't think…"

steven gallagher replied Jan 14, 2017 to Relly low action

5 Jan 14, 2017
Reply by steven gallagher

"So why did you CNC a fixed radius sanding beam? Can't you can buy those much cheaper…"

steven gallagher replied Jan 8, 2017 to Nut compensation

64 Jan 18, 2017
Reply by Roger Häggström

"Well, I'm not advocating doing a least squares regression analysis. :-) I use a Korg…"

steven gallagher replied Jan 6, 2017 to Nut compensation

64 Jan 18, 2017
Reply by Roger Häggström

"See above."

steven gallagher replied Jan 6, 2017 to Nut compensation

64 Jan 18, 2017
Reply by Roger Häggström

"You compensated the bridge and nut to make the open string, the 3rd, and 12th frets…"

steven gallagher replied Jan 5, 2017 to Nut compensation

64 Jan 18, 2017
Reply by Roger Häggström

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service