FRETS.NET

Matt Dreher's Discussions (11)

Discussions Replied To (10) Replies Latest Activity

"No, the neck does not move in the cavity and does not extend into the cavity.  The f…"

Matt Dreher replied May 1 to 1977 Gibson ES-335TD Loose Heel Joint Repair Question

5 May 1
Reply by Matt Dreher

"Thanks for the input Len, what you suggested is my next step to see what happens and…"

Matt Dreher replied Apr 29 to 1977 Gibson ES-335TD Loose Heel Joint Repair Question

5 May 1
Reply by Matt Dreher

" Here are the pics so you don't have to open them up... "

Matt Dreher replied Apr 25 to 1977 Gibson ES-335TD Loose Heel Joint Repair Question

5 May 1
Reply by Matt Dreher

"  i cant tell from the photo, but if it is a slight impression, i believe the glue w…"

Matt Dreher replied Mar 17, 2016 to bridge r&r

32 Apr 14, 2016
Reply by Hesh Breakstone

"In my opinion and from past experience, there is no need to remove the neck. The nec…"

Matt Dreher replied Mar 2, 2016 to Ukulele Repair Question

4 Mar 2, 2016
Reply by Chris Shaltis

"I have never run into this before but i would speculate that the traditional method…"

Matt Dreher replied Feb 24, 2016 to Stick Glue - Neck Reset

3 Feb 24, 2016
Reply by Matt Dreher

"that is fantastic!"

Matt Dreher replied Feb 24, 2016 to Fret tang removal machine

10 Feb 27, 2016
Reply by Claus Holm Jensen

"I second what Ned has to say. I have found on neck resets or bridge replacements on…"

Matt Dreher replied Feb 22, 2016 to Downward Bridge Pressure Archtop Guitar

3 Feb 22, 2016
Reply by Paul Said

"these are some of the things i have done in my repair shop that you may want to try.…"

Matt Dreher replied Feb 15, 2016 to Chips in finish

2 Feb 15, 2016
Reply by Matt Dreher

"i have had good luck with adding more washers as well. Sometimes the cavity does not…"

Matt Dreher replied Feb 12, 2016 to Stubborn Neck/Truss Rod

7 Feb 14, 2016
Reply by Brian Evans

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service