FRETS.NET

Carl Mesrobian's Discussions (38)

Discussions Replied To (31) Replies Latest Activity

"The plate is bent to produce the uprights, and the end of the shaft is peened over.…"

Carl Mesrobian replied Aug 15, 2019 to Broken Grover (Sta-Tite?) Tuner

5 Aug 15, 2019
Reply by Carl Mesrobian

"The guitar is from the 30's and the new Grovers are not the same specs. I already ve…"

Carl Mesrobian replied Aug 14, 2019 to Broken Grover (Sta-Tite?) Tuner

5 Aug 15, 2019
Reply by Carl Mesrobian

"I THINK the OP is referring to the flat area that would define the new scribe line f…"

Carl Mesrobian replied Mar 14, 2017 to Help with neck reset...what method to taper heel?

14 Mar 15, 2017
Reply by Dave Richard

"I've made all sorts of jigs and half of them just sit, waiting to be cannibalized in…"

Carl Mesrobian replied Mar 14, 2017 to Frank Ford, do you have more pics of...?

13 Mar 14, 2017
Reply by Carl Mesrobian

"I've made a wooden caul from a piece of scrap maple that is flat on one surface and…"

Carl Mesrobian replied Mar 14, 2017 to Help with neck reset...what method to taper heel?

14 Mar 15, 2017
Reply by Dave Richard

"Frank - Take advantage of the idle seconds and get better :) "

Carl Mesrobian replied Jun 4, 2016 to Get well soon, Frank

20 Jun 12, 2016
Reply by James West

"Don't know if this will bump the post -- hope so!  I just found a video on Stew Mac…"

Carl Mesrobian replied Jul 3, 2015 to Cellosolve Butyl

23 Jul 4, 2015
Reply by Mark Fogleman

"Was the gun squeaky cleaned before you shot anything through it? I know -- I'm 3 yea…"

Carl Mesrobian replied Jun 8, 2015 to Nitro Finish Crackling Under the Clear Coat????

11 Jun 8, 2015
Reply by Jeff Perkins

"Pre bending a blade? Cool..."

Carl Mesrobian replied May 26, 2015 to Curved Razor Scraper

5 May 27, 2015
Reply by Ned Knepp

"Tensioning the curve is one less force I have to deal with while scraping , and I ca…"

Carl Mesrobian replied May 26, 2015 to Curved Razor Scraper

5 May 27, 2015
Reply by Ned Knepp

RSS

© 2020   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service