Forum Discussions (4,425)
| Discussions | Replies | Latest Activity |
|---|---|---|
How can I remove the saddle without removing the strings?Hi, I have an acoustic guitar where I need to remove the saddle, shave it down a hair, then replace it. How can I do this while saving my s… Started by Arthur Sweeney in Luthier Talk |
10 |
May 20, 2014 Reply by Ron frazier |
Vintage Fender Fret ChallengeI may have "over-reliced" this one. Can anyone walk me through a repair solution ? Started by Thomas James in Luthier Talk |
12 |
May 20, 2014 Reply by Ron frazier |
Clapton Mid Boost ModGreetings! I have a customers Thinline Tele with the Fender Humbuckers (new Mexican made). He purchased a Clapton mid boost mod kit and ha… Started by Gregory Hites in Luthier Talk |
11 |
May 20, 2014 Reply by Gregory Hites |
Straps attached at headstock: Have any of you ever seen any damage from this?An acquaintance on Facebook saw a picture of a young guy playing a Martin with the strap attached at the headstock and raised a bit of fus… Started by Kerry Krishna in Luthier Talk |
16 |
May 19, 2014 Reply by George Roberts |
Broken Banjo Dowel StickIt seems to be that May is banjo month for me, and now i'm putting back together a couple of very old tenors. One is an amazing looking Ma… Started by Brian Hart in Luthier Talk |
6 |
May 19, 2014 Reply by Mark Pollock |
1970s Martin headstock repairHello Frank & the Frets.com community, I've recently been handed this piece of work. Thoughts, comments, advice? Basically somebody'… Started by Trent Norgart in Luthier Talk |
25 |
May 17, 2014 Reply by Trent Norgart |
Re-gluing Cocobolo BridgeHi all, I wondered whether I could pick your brains about this topic... A guitar I made recently had the bridge peel off. It was original… Started by Jon Burton in Luthier Talk |
17 |
May 17, 2014 Reply by Ned Knepp |
checking for high/low fretshi all, most of you have probably came across stewmac's fret rocker. there are some things about it I don't understand. I have several too… Started by tadej bratkovic in Luthier Talk |
9 |
May 15, 2014 Reply by John |
telescoping brass tubing plug cuttersI have purchased a 3/16 telescoping brass tube, filed teeth in one end, and started cutting plugs from rosewood. The plugs are coming out 3… Started by Lee Gendvilas in Luthier Talk |
16 |
May 15, 2014 Reply by Ron frazier |
Ethics discussion: when to turn away workHello gentlemen. I'm pretty new here, so forgive me if this seems an inappropriate topic or has been discussed to death already. Here's th… Started by Brian Stewart in Luthier Talk |
24 |
May 15, 2014 Reply by Ron frazier |
© 2026 Created by Frank Ford.
Powered by
