Forum Discussions (4,412)
| Discussions | Replies | Latest Activity |
|---|---|---|
Best Way to Darken a Rosewod FretboardI'm not a maker or repairer; just a player and enthusiast. My question is this: what do you experts believe is the best way to darken a lig… Started by Dave Trickey in Luthier Talk |
4 |
Dec 1, 2008 Reply by Doug T |
Difficulty leveling RosetteI installed a rosette in a Euro Spruce soundboard, leaving it slightly proud so that it could be scraped level. Well, the rosette seems to… Started by Jerry Mercer in Luthier Talk |
11 |
Nov 30, 2008 Reply by Bob Webster |
Finishing Curly MapleCan anyone suggest how to finish curly maple to get a some what antique look? I'm wanting to finish a banjo rim and neck and would like to… Started by Bill Rickard in Luthier Talk |
9 |
Nov 29, 2008 Reply by Russell Vance |
Jumbo GuitarG'Day Members, If milling and resawing Back and sides billets for Jumbo Guitar how much extra do you feel one should cut sizes at to allow… Started by Robert Mac Millan in Luthier Talk |
2 |
Nov 28, 2008 Reply by Robert Mac Millan |
Piezo Saddles (for tune-o-matics)has anyone here whacked one with a hammer to see what's inside? Looks like the actual saddle where the string rests is wrapped in something… Started by Penql in Luthier Talk |
3 |
Nov 28, 2008 Reply by Donald A. Fortune |
Ning IssuesI sent in a support ticket - nice that they allow users to report problems. Started by Penql in Luthier Talk |
1 |
Nov 27, 2008 Reply by Penql |
Pumice and RottenstoneI am at the final stages of my first guitar. I am just waiting for the KTM-9 brushed on water-based lacquer to cure before buffing. The tro… Started by Doug Collins in Luthier Talk |
10 |
Nov 24, 2008 Reply by Doug Collins |
Any thoughts on this repair?I am not going to take this repair on. But wanted to post it before it leaves shop. It is a Johnny Smith in a bad way. Braces are butchered… Started by Mike Fleck in Luthier Talk |
0 | Nov 24, 2008 |
What to do about white stuff In "dry creek bed" checked finish?The photo tells the story. The back of the headstock looks the same, and there is a little of this on sides at the upper bout, and a spot o… Started by Rick Homan in Luthier Talk |
4 |
Nov 24, 2008 Reply by Rick Homan |
Adjusting 60's D18 neck reliefI have a 1965 D18 on the bench for the well-known 'Top bulge at the bass side of the bridge' problem, plus minor intonation tweaks and acti… Started by Alys and Simcha in Luthier Talk |
5 |
Nov 23, 2008 Reply by David Reilly |
© 2025 Created by Frank Ford.
Powered by
