Forum Discussions (4,412)
| Discussions | Replies | Latest Activity |
|---|---|---|
Making Forms for Fox/Universal SidebenderWhen I make a new form for my sidebender, I undersize it by the thickness of the sides, and usually have to touch up the bends on a hot iro… Started by Larry Schultz in Luthier Talk |
5 |
Nov 22, 2008 Reply by Larry Schultz |
neck reset due to humidity?I moved to the North Coast of the Dominican Republic and brought guitars, amps. Humidity here is very high, about 90 percent, and it is hot… Started by ken in Luthier Talk |
0 | Nov 21, 2008 |
Shellac BlushI have found several effective ways of chasing blush out of lacquer finishes, but I am having the devil's own time of chasing the blush fro… Started by Carter Ruff in Luthier Talk |
4 |
Nov 21, 2008 Reply by Greg Mirken |
Learning To InlayI would like to start the long process of learning the fine art of inlay and engraving. I had some inlay work done by Larry Robinson and ev… Started by tdibell in Luthier Talk |
4 |
Nov 21, 2008 Reply by Jerry Mercer |
What repairs do you see most frequently?I'm a fixer, not a builder. I work for 2 music stores in the area... and I'd like to compare what types of repairs you most often see, part… Started by Mike Kolb in Luthier Talk |
6 |
Nov 20, 2008 Reply by mathieu thomas-guy |
Guitar LabelI've read a lot of books on guitar building, but I've never found anything on the application of the label. I've always printed one on the… Started by Jack Lord in Luthier Talk |
7 |
Nov 17, 2008 Reply by Neil |
CORRECTING A BAD NECK RESET MARTIN D-12-35This may be a problem that you've all ran across in the past but it's the first time I've had to deal with it. A person brought a nice D-12… Started by Greg Harmon in Luthier Talk |
6 |
Nov 16, 2008 Reply by Greg Harmon |
Induced curve idea?Has anyone ever tried another brace system such as thin material heat/bent to desired curvature and glued under the top.I'm going to to try… Started by Tim Mace in Luthier Talk |
11 |
Nov 15, 2008 Reply by Rick Homan |
Neck Angle GeometryHi Everybody Just joined up & have enjoyed reading some of the posts & discussions on this site. They are very informative. Well I'… Started by Joey Herscovitch in Luthier Talk |
15 |
Nov 15, 2008 Reply by Tim Mace |
Crushed place, upper bout, Larrivee parlor guitarFirst, thanks to Frank for starting this great place. I'm pretty sure that along with frets.com it will become one of my favorites. I almo… Started by dep in Luthier Talk |
21 |
Nov 14, 2008 Reply by dep |
© 2025 Created by Frank Ford.
Powered by
