FRETS.NET

Pierre-Antoine Roiron's Discussions (585)

Search Forum

View

Discussions Replied To (563) Replies Latest Activity

"When it turns out like this, I remove the frets and sandbelt/plane the fretboard out…"

Pierre-Antoine Roiron replied Feb 11, 2012 to Tenacious Asian glues

 9 Feb 15, 2012
Reply by Tai Fu

"I don't think you can do anything about it since it's an all packed-up piezzo pickup…"

Pierre-Antoine Roiron replied Feb 10, 2012 to Fishman Archtop Bridge weak on Bass side

 7 Feb 11, 2012
Reply by Len Biglin

"I was considering going to a grave stone maker's warehouse, but I was wondering if t…"

Pierre-Antoine Roiron replied Feb 5, 2012 to Long flat surface for sanding neck blanks

 8 Feb 7, 2012
Reply by Charlie Hoffman

"I would sand to 180 grit dead flat, then a wipe of shellac, then clear nitro. PU and…"

Pierre-Antoine Roiron replied Feb 3, 2012 to Polyester finish

 9 Feb 3, 2012
Reply by Pierre-Antoine Roiron

"The neck is held by a screw behind the wood label. I would make a new top, and use t…"

Pierre-Antoine Roiron replied Feb 1, 2012 to Martin DX1RGT Neck Removal

 15 Feb 9, 2012
Reply by lonnie james barber

"Nathan gave you a good method  (good job!). I would do it that way, and would do it…"

Pierre-Antoine Roiron replied Feb 1, 2012 to Wilkinson trem post hole issue

 17 Feb 2, 2012
Reply by nathan clark

"That should be a good start! For hitting them harder then just with steel wool, you…"

Pierre-Antoine Roiron replied Jan 28, 2012 to Tips on relicing a creme mini humbucker mounting ring

 5 Jan 29, 2012
Reply by Steven D. Wilson

"I use a bending iron, and no problem with 1mm to 3mm maple (well 3 tends to be hard.…"

Pierre-Antoine Roiron replied Jan 27, 2012 to bending sheet or veneer ???? steam ?? heat ??

 7 Jan 28, 2012
Reply by William F.Eden

"Nice way to see that vocabulary and living language thing! French has quite a number…"

Pierre-Antoine Roiron replied Jan 27, 2012 to Plans Books For Building Dobros

 12 Jan 28, 2012
Reply by Ian Supplee

"Good non-piezzo contact microphone can be found in Schertler's catalog. Very good pr…"

Pierre-Antoine Roiron replied Jan 27, 2012 to HELP! Mandolin Pickups

 17 Jan 30, 2012
Reply by LARRY KLOSE

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service