FRETS.NET

Robbie Collins's Discussions (758)

Search Forum

View

Discussions Replied To (713) Replies Latest Activity

"Another thought ... since avg1 + e computes the exact length required, we might want…"

Robbie Collins replied Nov 20, 2014 to So.. where's my math error?

 44 Nov 23, 2014
Reply by Ned Knepp

"LOL. I was doodling guitars, surfboards and Alfred E. Neuman myself beginning in the…"

Robbie Collins replied Nov 20, 2014 to So.. where's my math error?

 44 Nov 23, 2014
Reply by Ned Knepp

"Correction: The second set of nested equations doesn't need to be multiplied by n, i…"

Robbie Collins replied Nov 20, 2014 to So.. where's my math error?

 44 Nov 23, 2014
Reply by Ned Knepp

"OK, if you want fun then how about ? This creates an error term e that when added to…"

Robbie Collins replied Nov 20, 2014 to So.. where's my math error?

 44 Nov 23, 2014
Reply by Ned Knepp

"It's very easy to make a 1:1 precision drawing, cut it out, place it on an 1/8" (or…"

Robbie Collins replied Nov 19, 2014 to 7 String comet banjo

 12 Nov 24, 2014
Reply by jerry mc hugh

"I've made that same calculation ((F1+F2)/2)xN, but Glen is right about the spacing.…"

Robbie Collins replied Nov 19, 2014 to So.. where's my math error?

 44 Nov 23, 2014
Reply by Ned Knepp

"Here's the thread where Klangfix explains his setup: http://euroguitars.co.uk/viewto…"

Robbie Collins replied Nov 17, 2014 to Neck Heat Press Device?

 37 Aug 10, 2021
Reply by Werther Ellerbrock

"Frank wondered, in the above thread, whether the colloidal silica used with System 3…"

Robbie Collins replied Nov 17, 2014 to Qualalacq lacquer

 5 Nov 17, 2014
Reply by Robbie Collins

"You might check this thread on how to flatten lacquer: http://fretsnet.ning.com/foru…"

Robbie Collins replied Nov 17, 2014 to Qualalacq lacquer

 5 Nov 17, 2014
Reply by Robbie Collins

"I did a technical drawing of old Klusons thinking I'd make some in my machine shop c…"

Robbie Collins replied Nov 17, 2014 to making tuning keys

 3 Nov 17, 2014
Reply by rahoul waghmare

RSS

Members

© 2026   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service