FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"Is that saddle a loose fit? I think I am seeing a gap at the back edge (made worse b…"

Greg Mirken replied Sep 20, 2015 to Bridge repair or replace?

 5 Sep 21, 2015
Reply by Ron Frazier

"I should have said some ukes. I have set ukes up for players who use a low 4th strin…"

Greg Mirken replied Aug 16, 2015 to Flat Radius = Flat Saddle? Classical Setup

 3 Aug 16, 2015
Reply by Greg Mirken

"Yes, the top of the saddle should be straight rather than arched. Since the bass str…"

Greg Mirken replied Aug 16, 2015 to Flat Radius = Flat Saddle? Classical Setup

 3 Aug 16, 2015
Reply by Greg Mirken

"I've always just used naphtha. Does the job; no need to follow with anything. Let it…"

Greg Mirken replied Aug 5, 2015 to Cleaning surface for double stick velco

 5 Aug 6, 2015
Reply by Mark Fogleman

"What Frank means by "far as I know" is that he has installed hundreds of 3/32" picku…"

Greg Mirken replied Jul 22, 2015 to Yamaha saddle. 3/32" or 1/8"?

 6 Jul 22, 2015
Reply by Mike Baker

"By the way, Mike, fish the leads out the endpin hole, solder to the jack and screw t…"

Greg Mirken replied Jul 22, 2015 to End-pin Jack Installation Puzzle....

 27 Jul 28, 2015
Reply by Paul Verticchio

"Very unlikely, I'd say. The nut isn't buried very deep- you could remove it with a s…"

Greg Mirken replied Jul 6, 2015 to Neck crack at headstock

 20 Jul 12, 2015
Reply by peter meyer

"I hope you cautioned the customer that the repair would show; it's really hard to ma…"

Greg Mirken replied Jun 12, 2015 to Matte Shellac Finish?

 3 Jun 12, 2015
Reply by Keith Somerville

"I hardly ever do this any more, but I always found 3M double sided foam tape adequat…"

Greg Mirken replied Mar 18, 2015 to Adhesives - mounting clips and controls in the box.

 7 Mar 19, 2015
Reply by Andrew

"I would try stretching and regluing it again. Because you have a longer piece to str…"

Greg Mirken replied Feb 14, 2015 to Martin 000M loose binding at the waist

 3 Feb 15, 2015
Reply by Steve Hays

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service