FRETS.NET

Jim Bancroft's Discussions (316)

Search Forum

View

Discussions Replied To (304) Replies Latest Activity

"Pretty much left it like it was. I figured the answer out myself, which is overspra…"

Jim Bancroft replied Jan 28, 2009 to Removing washer indentations on Martin Headstock

 8 Jan 28, 2009
Reply by Jim Bancroft

"I use this technique on either a new fretboard or a refret. I use a 6" mill file, (…"

Jim Bancroft replied Jan 26, 2009 to Filing Fret Ends

 10 Jan 26, 2009
Reply by Russell Vance

"I think this is the setup you have on this guitar? There is a pocket that the neck d…"

Jim Bancroft replied Jan 23, 2009 to Neck reset

 8 Jan 23, 2009
Reply by Ned Knepp

"I don't know of a supplier? If you want, I could cut you one and mail it. I would ne…"

Jim Bancroft replied Jan 23, 2009 to Neck reset

 8 Jan 23, 2009
Reply by Ned Knepp

"Doesn't sound like you are doing anything wrong. You are using nylon uke strings? I'…"

Jim Bancroft replied Jan 23, 2009 to Caved-in plates

 17 Feb 2, 2009
Reply by Bob Webster

"If you have no buzzing while playing the string open, you do not have a problem. On…"

Jim Bancroft replied Jan 23, 2009 to Nut slot question?

 7 Aug 3, 2009
Reply by Antonio Cotichini

"If you want to do a professional job, I'd use a hardwood wedge made of maple, ebony,…"

Jim Bancroft replied Jan 23, 2009 to Neck reset

 8 Jan 23, 2009
Reply by Ned Knepp

"Don't Know! But, if the wood is thick enough, .040" to .060", and properly braced, I…"

Jim Bancroft replied Jan 23, 2009 to Caved-in plates

 17 Feb 2, 2009
Reply by Bob Webster

"Thanks Paul and Ron, but I took care of this months ago. No, I didn't destroy anythi…"

Jim Bancroft replied Jan 23, 2009 to Removing washer indentations on Martin Headstock

 8 Jan 28, 2009
Reply by Jim Bancroft

"Apply some shellac with a pad or brush. About as inexpensive as I can think of, but…"

Jim Bancroft replied Jan 20, 2009 to wore thru finish on larravee neck

 1 Jan 20, 2009
Reply by Jim Bancroft

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service