FRETS.NET

Paul Breen's Discussions (450)

Search Forum

View

Discussions Replied To (439) Replies Latest Activity

"Lee, I would do a few glue experiments with some samples. Let a bit of glue sit in b…"

Paul Breen replied Jun 19, 2015 to Epiphone PR5E/VS

 10 Jun 19, 2015
Reply by Paul Breen

"You have some clean up to do! Glue down the loose chips that the bridge won't cover…"

Paul Breen replied Jun 18, 2015 to Epiphone PR5E/VS

 10 Jun 19, 2015
Reply by Paul Breen

"Simple binding scraper for neck binding. Box cutter blade, two small machine screws,…"

Paul Breen replied Jun 9, 2015 to Freebie or Cheapie Tools and Devices

 117 Apr 10, 2017
Reply by Roger Häggström

"Eric, that should be what's called a dowel screw or dowel bolt. Wood screw thread on…"

Paul Breen replied Jun 6, 2015 to 1910 Comet Banjo Neck adjustment.

 14 Jun 8, 2015
Reply by Eric Sisterhen

"If I wasn't so cheap, I would have enough magnets to dedicate a few more to specific…"

Paul Breen replied May 18, 2015 to re-gluing braces

 11 May 18, 2015
Reply by Paul Breen

""The guitar looks dry to me....  I see the classic depression in front of the bridge…"

Paul Breen replied May 18, 2015 to Troublesome geometry changes?

 12 May 18, 2015
Reply by Paul Breen

"The neck geometry doesn't look bad from the images. It's also rather typical to have…"

Paul Breen replied May 15, 2015 to Troublesome geometry changes?

 12 May 18, 2015
Reply by Paul Breen

"It would also be helpful to see the straight edge from nut to end of finger board."

Paul Breen replied May 15, 2015 to Troublesome geometry changes?

 12 May 18, 2015
Reply by Paul Breen

"Can you post a picture of what the straight edge looks like on top of the fingerboar…"

Paul Breen replied May 15, 2015 to Troublesome geometry changes?

 12 May 18, 2015
Reply by Paul Breen

"There many ways to go about it. The only rules are to have the end string height giv…"

Paul Breen replied May 15, 2015 to Floating Bridge

 5 May 19, 2015
Reply by Thomas James

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service