FRETS.NET

Ron Frazier's Discussions (325)

Search Forum

View

Discussions Replied To (321) Replies Latest Activity

"I am interested !! Ron"

Ron Frazier replied Mar 27, 2009 to please advise ---X-brace notch

 13 Apr 8, 2009
Reply by Mark Tripp

"Yes inside you will have to glue a bridge plate, As long as the composition is right…"

Ron Frazier replied Mar 27, 2009 to Converting a backloading bridge to a pin bridge

 3 Mar 28, 2009
Reply by Frank Ford

"The bridge dr is the cats meow!! I have used it on old martins and Gibson's and othe…"

Ron Frazier replied Mar 27, 2009 to JLD Bridge Doctor on a laminate top?

 3 Mar 28, 2009
Reply by Rick Homan

"Use a fingernail file for the ends of the frets. It has a safe edge and is fine cut…"

Ron Frazier replied Mar 24, 2009 to Fret rounding files

 7 Mar 20, 2011
Reply by Ned Knepp

"I had one a few years ago that was in a hot place and it looked good but on closer i…"

Ron Frazier replied Mar 24, 2009 to ADVISE PLEASE!

 26 Apr 10, 2009
Reply by Ned Knepp

"All guitars tops deform some. Is this one deformed more than usual? It should never…"

Ron Frazier replied Mar 17, 2009 to 1971 D-41 Martin that was scalloped too much.

 5 Mar 19, 2009
Reply by Steve Frost

"I see this a lot. The strings are to high so they notch it to lower . Make a new sad…"

Ron Frazier replied Mar 14, 2009 to Are Classical Guitar Saddles Typically Notched?

 10 Apr 1, 2009
Reply by Bob Webster

"If the splatting is just blue lines I wouldnt wory about it. If it is punky like rot…"

Ron Frazier replied Mar 14, 2009 to Any tips on Bending Spalted Maple sides?

 23 Mar 16, 2009
Reply by Bob Webster

"When you bend the water that you use on the side just turns to steam and that is hot…"

Ron Frazier replied Mar 9, 2009 to Cracked side

 5 Mar 9, 2009
Reply by Mark Dobbins

"Don'T play it so much!! That is wear! Level the frets or change the worn frets. Ron"

Ron Frazier replied Mar 7, 2009 to Fret Question

 23 Mar 8, 2009
Reply by brums

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service