FRETS.NET

Jim Bancroft's Discussions (316)

Search Forum

View

Discussions Replied To (304) Replies Latest Activity

"I don't know of anything you can do at this point. If the inlays are still totally i…"

Jim Bancroft replied Nov 11, 2008 to 5 Strings banjo head contour issue

 4 Nov 11, 2008
Reply by Fabio Pollero

"As for repairing the finish, first find out what it is. It may be shellac, as that w…"

Jim Bancroft replied Nov 11, 2008 to Dealing with water damage on an old parlor guitar

 4 Nov 12, 2008
Reply by Rick Homan

"When I install a neck I'm not concerned about what angle the neck comes off the body…"

Jim Bancroft replied Nov 9, 2008 to Neck Angle Geometry

 15 Nov 15, 2008
Reply by Tim Mace

"I could be wrong, but, I think that the maple insert was for stiffening, and reinfor…"

Jim Bancroft replied Nov 7, 2008 to Gibson " A" Style Mandolins

 5 Nov 8, 2008
Reply by Eric Carswell

"There are only 2 solutions, that I know of, to straighten a bowed non-adjustable Mar…"

Jim Bancroft replied Nov 3, 2008 to Adjusting 60's D18 neck relief

 5 Nov 23, 2008
Reply by David Reilly

"Looks like a red mahogany stain might work. Stew Mac sells a variety that would work…"

Jim Bancroft replied Nov 2, 2008 to Crushed place, upper bout, Larrivee parlor guitar

 21 Nov 14, 2008
Reply by dep

"Glueing the bridge to the guitar top is not going to hinder vibrations. Why then are…"

Jim Bancroft replied Oct 30, 2008 to How to re-attach loose kerfed lining?

 10 Oct 30, 2008
Reply by Jim Bancroft

"What is wrong with my suggestion using hot hide glue or titebond? I've never tried i…"

Jim Bancroft replied Oct 30, 2008 to Gluing a plastic bridge

 6 Oct 30, 2008
Reply by Robert Filippi

"The molded plastic bridges on the 60's Gibson's were just bolted on, no glue. I'm a…"

Jim Bancroft replied Oct 29, 2008 to Gluing a plastic bridge

 6 Oct 30, 2008
Reply by Robert Filippi

"Rick, There are a few things I would probably do now that the back is off. I'd proba…"

Jim Bancroft replied Oct 26, 2008 to How to re-attach loose kerfed lining?

 10 Oct 30, 2008
Reply by Jim Bancroft

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service