FRETS.NET

Paul Breen's Discussions (450)

Search Forum

View

Discussions Replied To (439) Replies Latest Activity

"Yes, happy holidays to all! "

Paul Breen replied Dec 23, 2013 to Another year upon which to build. Merry Xmas.

 14 Dec 25, 2013
Reply by lowatter

"I would cut the binding under the pick guard bracket and just glue it down, the brac…"

Paul Breen replied Nov 26, 2013 to Loose binding at waist

 11 Nov 30, 2013
Reply by Kerry Krishna

"Hmmm... that locks like a bit of chain link fence, helpful Henry was at it again."

Paul Breen replied Nov 21, 2013 to Another hall of shame photo

 8 Nov 24, 2013
Reply by Randall Curtis Bowman

"Andrew, it's available at most hardware stores. I use fine...about $5 - $6 per bag o…"

Paul Breen replied Nov 21, 2013 to Binding nibs and a refret...

 22 Dec 7, 2013
Reply by LARRY KLOSE

"I have done this and it does a pretty decent job. One such instrument was my wife's…"

Paul Breen replied Nov 19, 2013 to Binding nibs and a refret...

 22 Dec 7, 2013
Reply by LARRY KLOSE

"I have to agree, just do a standard re-fret. You'll need to do some leveling, which…"

Paul Breen replied Nov 19, 2013 to Binding nibs and a refret...

 22 Dec 7, 2013
Reply by LARRY KLOSE

"Robbie, you could drop fill the missing Black with Black CA or Black tinted epoxy, s…"

Paul Breen replied Nov 15, 2013 to Finish Defect on Headstock - Advice Needed

 6 Nov 16, 2013
Reply by John

"Sounds like a job for hot hide glue to me..."

Paul Breen replied Nov 12, 2013 to Martin D16RGT with back seam split

 4 Nov 12, 2013
Reply by thefishinmusician

""The multicolour rope binding  is incredibly bright." Looks like a case queen, not…"

Paul Breen replied Nov 8, 2013 to Victor parlour guitar ....seen one ?

 3 Nov 8, 2013
Reply by Paul Breen

"Helpful Henry! I recognize his work."

Paul Breen replied Nov 8, 2013 to If this doesn't make your Friday, well, I just don't know what will...

 17 Nov 16, 2013
Reply by J R Emmett

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service