FRETS.NET

FRANK's Discussions (888)

Discussions Replied To (813) Replies Latest Activity

"that's not as cool as this mine went to 95 ,000 feet at mach 2.5 beat that and flew…"

FRANK replied May 1, 2010 to On another note altogether...

10 May 4, 2010
Reply by Mike Kolb

"SO John how are you attaching this card to the inside of the sound hole how can i ex…"

FRANK replied May 1, 2010 to Try fitting a thin card tornavoz.

32 May 23, 2010
Reply by Ned Knepp

"well happy i like to sand the sides once braced in the jig still. sand the sides in…"

FRANK replied Apr 30, 2010 to bent side first to glued to the top or first cut to exact depth

1 Apr 30, 2010
Reply by FRANK

"start again is where i would go to if you have the resource me i harvest all my back…"

FRANK replied Apr 30, 2010 to crack half way depthwise

1 Apr 30, 2010
Reply by FRANK

"i went to check my work and it was .110 about 2.5mm ?1.5 is very thin for my book"

FRANK replied Apr 30, 2010 to side thickness sanding

8 May 3, 2010
Reply by FRANK

"with the laminate sides the glue becomes a floating brace ?fyi anyway have had probl…"

FRANK replied Apr 30, 2010 to side thickness sanding

8 May 3, 2010
Reply by FRANK

"YOU MENTION CARD TUBS WHAT MATERIAL ARE YOU USING?"

FRANK replied Apr 29, 2010 to Try fitting a thin card tornavoz.

32 May 23, 2010
Reply by Ned Knepp

"TERRIFIC I AM EXCITED FOR YOU"

FRANK replied Apr 28, 2010 to New shop

7 Jun 14, 2010
Reply by Nick Anthony

"i think matts idea is a good one"

FRANK replied Apr 27, 2010 to Refretting of arch top with floating neck extension

11 Jan 24, 2013
Reply by Eric Steven Johansen

"YES TAKE IT AS A PAPER WEIGHT"

FRANK replied Apr 26, 2010 to 5/16" thick slate?

6 Apr 27, 2010
Reply by Tim Mace

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service