FRETS.NET

Pierre-Antoine Roiron's Discussions (585)

Search Forum

View

Discussions Replied To (563) Replies Latest Activity

"That's a valuable information, thanks!"

Pierre-Antoine Roiron replied May 6, 2010 to Parker Fly has loose frets

 9 May 6, 2010
Reply by Pierre-Antoine Roiron

"Yes, it is stainless steel, so no need for refret."

Pierre-Antoine Roiron replied May 5, 2010 to Parker Fly has loose frets

 9 May 6, 2010
Reply by Pierre-Antoine Roiron

"If the frets have a tang, you can use CA glue. On Parker Fly, they should be half ro…"

Pierre-Antoine Roiron replied May 3, 2010 to Parker Fly has loose frets

 9 May 6, 2010
Reply by Pierre-Antoine Roiron

"Good luck for the job. By the way, take the time to file cleanly your inlays (I orde…"

Pierre-Antoine Roiron replied Apr 28, 2010 to Removing a bridge - alternative methods?

 7 Apr 28, 2010
Reply by David Houchens

"Good luck!"

Pierre-Antoine Roiron replied Apr 28, 2010 to New shop

 7 Jun 14, 2010
Reply by Nick Anthony

"Dave, the formula, as any mathematical relationship (not sure of this word...), has…"

Pierre-Antoine Roiron replied Apr 26, 2010 to Try fitting a thin card tornavoz.

 32 May 23, 2010
Reply by Ned Knepp

"That's what's adviced in LMII side bending jig video too."

Pierre-Antoine Roiron replied Apr 26, 2010 to hot iron vs flowing steam for bending side

 13 Apr 26, 2010
Reply by Donald A. Fortune

"To "compute" the inner volume of an instrument, you can pour water in it until it's…"

Pierre-Antoine Roiron replied Apr 24, 2010 to Try fitting a thin card tornavoz.

 32 May 23, 2010
Reply by Ned Knepp

"The first Wide mouth selmer guitars were made with a resonator like the one you're t…"

Pierre-Antoine Roiron replied Apr 23, 2010 to Try fitting a thin card tornavoz.

 32 May 23, 2010
Reply by Ned Knepp

"I reglued some necks broken almost like this (the fingerboard was still attached). I…"

Pierre-Antoine Roiron replied Apr 22, 2010 to Neck Reglue approach

 6 May 1, 2010
Reply by FRANK

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service