FRETS.NET

Mark McLean's Discussions (374)

Search Forum

View

Discussions Replied To (369) Replies Latest Activity

"Well done Roger!  I look forward to reading it and asking some questions - after my…"

Mark McLean replied Jan 18, 2022 to Congratulations to Roger Hagstromm

 8 Apr 19, 2022
Reply by Roger Häggström

"Hi Mark I think you have raised some really good points.  It sounds like you have tr…"

Mark McLean replied Oct 5, 2021 to Dremel Routing Fret Slots

 42 Feb 5, 2025
Reply by Todd Rose

"It is funny that Frank should resurrect this thread at the moment.  I had forgotten…"

Mark McLean replied Oct 5, 2021 to Dremel Routing Fret Slots

 42 Feb 5, 2025
Reply by Todd Rose

"I find I can easily get sufficient torque with an Allen key  - and you can't effecti…"

Mark McLean replied Aug 29, 2021 to 70's Takamine 12 string Neck reset

 4 Aug 29, 2021
Reply by Simon Appleton

"G’day Simon It is definitely a good idea to convert from the dowels to a bolt on.  I…"

Mark McLean replied Aug 29, 2021 to 70's Takamine 12 string Neck reset

 4 Aug 29, 2021
Reply by Simon Appleton

"Thanks for that nice pictorial Taffy.  Being in Australia with thousands of Maton gu…"

Mark McLean replied Jul 9, 2021 to Palathetic Pickups and top distortion.

 2 Jul 9, 2021
Reply by Mark McLean

"If there is not enough room for two rows of pin holes you can set up a 12-string wit…"

Mark McLean replied Jun 6, 2021 to Hofner 12 String Rebuild Advice

 11 Jun 6, 2021
Reply by Frank Capo

"I guess it makes sense for them to manufacture a unit that can be assembled as eithe…"

Mark McLean replied May 30, 2021 to Left-hand right-hand tuner swap

 2 Jun 9, 2021
Reply by Russell Vance

"If the straightedge lands just below the top of the bridge it is a fairly good sign…"

Mark McLean replied May 18, 2021 to Measuring the gap from the top of the 12th fret to the bottom of a straightedge to determine the need for a neck reset.

 8 May 18, 2021
Reply by Jeff Bolek

"Jeff Most discussions look at this measurement in a slightly different way, as you h…"

Mark McLean replied May 17, 2021 to Measuring the gap from the top of the 12th fret to the bottom of a straightedge to determine the need for a neck reset.

 8 May 18, 2021
Reply by Jeff Bolek

RSS

Members

© 2026   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service