FRETS.NET

Mark A. Kane's Discussions (236)

Search Forum

View

Discussions Replied To (219) Replies Latest Activity

"JR, this stuff frets like a breeze! Just don't sand the surface! It's just a paper-l…"

Mark A. Kane replied Sep 5, 2014 to Resetting Martin neck with Richlite fingerboard

 20 Sep 10, 2014
Reply by Dave Richard

"Just a follow-on, and not to defend Martin but their response makes perfect sense, b…"

Mark A. Kane replied Sep 5, 2014 to Resetting Martin neck with Richlite fingerboard

 20 Sep 10, 2014
Reply by Dave Richard

"I should have said Infrared Thermometer. Like this one. http://www.amazon.com/HDE-T…"

Mark A. Kane replied Sep 2, 2014 to Resetting Martin neck with Richlite fingerboard

 20 Sep 10, 2014
Reply by Dave Richard

"I've done a bunch of them; here are my observations. There is no epoxy involved in t…"

Mark A. Kane replied Sep 1, 2014 to Resetting Martin neck with Richlite fingerboard

 20 Sep 10, 2014
Reply by Dave Richard

"Or you could spend the 45-60 minutes that it would take to accommodate his wishes, a…"

Mark A. Kane replied Jun 25, 2014 to Frets Too Round!!!

 11 Jun 26, 2014
Reply by Frank Ford

"I haven't strung a guitar with the guard in place, but a slit down the centerline fr…"

Mark A. Kane replied Apr 24, 2014 to Chop veggies and protect your guitar at the same time...

 16 Apr 28, 2014
Reply by Ian Pender

"If you are careful you can re-use the pins if you are planning on re-using the bridg…"

Mark A. Kane replied Apr 22, 2014 to Martin bridge removal with locating pins

 5 Apr 23, 2014
Reply by Darren

"It's deep. It's not simply taking off the lacquer. The bridge is recessed into the t…"

Mark A. Kane replied Apr 17, 2014 to bridge cut into the top!!! Martin 1983 D28

 42 May 3, 2014
Reply by Fritz Froeschner

"In recognition of the tradition and phenomenon of parallel development (think Tesla…"

Mark A. Kane replied Apr 15, 2014 to Neck Reset Formula

 21 Jan 22, 2017
Reply by Tim Nolte

"But Jeff, 25 buyers can't be wrong!"

Mark A. Kane replied Apr 15, 2014 to The latest in nut technology! (!!!)

 26 May 10, 2014
Reply by Robbie Collins

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service