FRETS.NET

Kerry Krishna's Discussions (1,028)

Search Forum

View

Discussions Replied To (907) Replies Latest Activity

" Murray, I am thinking that those statements that you just made would make you a pre…"

Kerry Krishna replied Nov 14, 2011 to Bridge Saddle & Nut Materials

 40 Nov 21, 2011
Reply by Hesh Breakstone

" This is a pretty old method that they have apparently been using in the Violin worl…"

Kerry Krishna replied Nov 11, 2011 to Egg White Pore Filling

 3 Nov 16, 2011
Reply by Tim Frank

" Drill TWO holes! One for steam and one for steam to escape. Otherwise you can do a…"

Kerry Krishna replied Nov 10, 2011 to 1955 Gibson ES-225 Neck Joint?

 6 Nov 14, 2011
Reply by Jeff Perkins

"Paul, I had always thought that the reasons for all the cracks in Ovations tops was…"

Kerry Krishna replied Nov 4, 2011 to Cellosolve on Ovation Catalyzed Polyester??

 11 Nov 25, 2011
Reply by Pierre-Antoine Roiron

"Pierre, what an amazing job on that 125. SOOO much work! Thanks so much for photo do…"

Kerry Krishna replied Oct 31, 2011 to Patching a side

 25 Dec 22, 2012
Reply by Hesh Breakstone

"That's two for side replacement. What brand of axe is this?"

Kerry Krishna replied Oct 30, 2011 to Patching a side

 25 Dec 22, 2012
Reply by Hesh Breakstone

"Scott brings up a great point. Did you want it black?   "

Kerry Krishna replied Oct 29, 2011 to Coloring a Maple fret board ??????

 6 Oct 31, 2011
Reply by Pierre-Antoine Roiron

"Mike, so you would be one of the twenty or so Luthiers in North America that will ac…"

Kerry Krishna replied Oct 24, 2011 to ovation model 1612-1 possible for bridge conversion?

 8 Oct 24, 2011
Reply by Mike Kolb

"Here is a shot of the fast mask that a lot of folks use for this. It is two tape thi…"

Kerry Krishna replied Oct 21, 2011 to What is the best way to shine-up frets, fine steel wool, or fine sand paper?

 10 Oct 23, 2011
Reply by Arthur Sweeney

"Thanks Russell I appreciate your post.  If it were possible, I would be making up  a…"

Kerry Krishna replied Oct 21, 2011 to Best way to cut a fretboard reveal edge on for binding.

 9 Oct 21, 2011
Reply by John

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service