FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Don't laugh, it's not as expensive as it looks.  I use ebony 12" radius boards with…"

Russell Vance replied Mar 9, 2012 to jigs/fixtures for radiusing fingerboards

 10 May 6, 2012
Reply by nick-p

"Hi Fred, I use a Stew Mac reamer which is 4-5 years old and has done a fair amount o…"

Russell Vance replied Mar 8, 2012 to 3º vs. 5º bridge pins.....?

 5 Mar 8, 2012
Reply by fred williams

"Got your two cents worth eh.......   Nice, another thing I didn't know about my tune…"

Russell Vance replied Feb 28, 2012 to Strobe tuner cent display

 3 Feb 28, 2012
Reply by Russell Vance

"Thanks Rory, good info.   If the saddles are skinny they tend to lean over towards t…"

Russell Vance replied Feb 27, 2012 to Gretsch 6176 semi-acoustic bass saddle split

 6 Feb 28, 2012
Reply by harrison phipps

"Hi Rory, It's not the saddle which is the problem, if it is sound why would you repl…"

Russell Vance replied Feb 27, 2012 to Gretsch 6176 semi-acoustic bass saddle split

 6 Feb 28, 2012
Reply by harrison phipps

"Only excellent!  "

Russell Vance replied Feb 24, 2012 to When was fretwire with a tang developed?

 6 Feb 24, 2012
Reply by Russell Vance

"Hi Len, wipe the board down with automotive surface prep/wax remover, then wipe this…"

Russell Vance replied Feb 19, 2012 to Fender J Bass fretless sealing rosewood

 7 Feb 21, 2012
Reply by Pierre-Antoine Roiron

"Guys, Yep sorry about that...I rewrote that post a couple of time to try and get the…"

Russell Vance replied Feb 18, 2012 to MICARTA?

 35 Feb 18, 2012
Reply by Paul Hostetter

"John, I'm sure you mean well here, but, opinion and compensation for poor practices…"

Russell Vance replied Feb 17, 2012 to MICARTA?

 35 Feb 18, 2012
Reply by Paul Hostetter

"Epoxy is used by some of our high end makers such as Collins to glue on fingerboards…"

Russell Vance replied Feb 17, 2012 to MICARTA?

 35 Feb 18, 2012
Reply by Paul Hostetter

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service