FRETS.NET

Paul Hostetter's Discussions (265)

Search Forum

View

Discussions Replied To (264) Replies Latest Activity

"I reworked a few for Bob Brozman and a few other folks some years back, and went so…"

Paul Hostetter replied May 9, 2012 to Tiple intonation

 48 Jul 15, 2019
Reply by Terry Straker

"Silly. You can do lots of frets at once with a sanding block with 800 grit paper on…"

Paul Hostetter replied May 9, 2012 to Has anyone tried the StewMac Fret Erasers?

 13 May 12, 2012
Reply by Bob Steinarsson

"Slower speed would be better, of course, and some lubrication (which you can wash ou…"

Paul Hostetter replied Apr 24, 2012 to telescoping brass tubing plug cutters

 16 May 15, 2014
Reply by Ron frazier

"There are the cited numbers and then there's the actual on-the-gound experience. Bas…"

Paul Hostetter replied Apr 18, 2012 to Stainless - The End All To Be All....

 32 May 8, 2012
Reply by Ned Knepp

"Except perhaps flamenco players, who routinely waste frets the same way. Right behin…"

Paul Hostetter replied Apr 18, 2012 to Stainless - The End All To Be All....

 32 May 8, 2012
Reply by Ned Knepp

"A properly cut nut needs no lube. "

Paul Hostetter replied Apr 11, 2012 to What's your favourite NUT LUBE ?

 18 Dec 25, 2012
Reply by LARRY KLOSE

"I have yet to see a commercially available bridge to replace the plastic ones that's…"

Paul Hostetter replied Mar 31, 2012 to 64 lg1 bridge plate

 9 Apr 3, 2012
Reply by Rodger C.Palmer

"What's going on here? No bridgepin holes in the bridgeplate? A lot of glue mess that…"

Paul Hostetter replied Mar 29, 2012 to New here with a few questions

 23 Mar 30, 2012
Reply by John

"I recall a long thread about these some years ago. They were really basic Harmony-ma…"

Paul Hostetter replied Mar 27, 2012 to New here with a few questions

 23 Mar 30, 2012
Reply by John

"Go ahead with your questions, and please post a photo or two as well.  There is a Ha…"

Paul Hostetter replied Mar 27, 2012 to Harmony Monterey

 12 Mar 29, 2012
Reply by Dale Humphries

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service