FRETS.NET

Roger Häggström's Discussions (579)

Discussions Replied To (533) Replies Latest Activity

"That's about the same story for me. The heat stick got stuck in the hole and the sol…"

Roger Häggström replied Jul 7, 2021 to Stewmac Heat Stick

37 Jul 8, 2021
Reply by Dave Richard

"That leave us with a short inside one of the cables or discs. The faulty disc/cable…"

Roger Häggström replied Jul 3, 2021 to Piezo pickup failure?

12 Jul 3, 2021
Reply by Roger Häggström

"Was it a cable tie?"

Roger Häggström replied Jul 1, 2021 to Piezo pickup failure?

12 Jul 3, 2021
Reply by Roger Häggström

"I would remove the brace if possible and use a pin bridge, if not I would use an end…"

Roger Häggström replied Jun 4, 2021 to Hofner 12 String Rebuild Advice

11 Jun 6, 2021
Reply by Frank Capo

"Actually, I would have saved the metal as I always do that. In 20 years I have never…"

Roger Häggström replied Jun 4, 2021 to Hofner 12 String Rebuild Advice

11 Jun 6, 2021
Reply by Frank Capo

"Throw all the metal in the bin! I would make a standard pin bridge with a bone saddl…"

Roger Häggström replied Jun 4, 2021 to Hofner 12 String Rebuild Advice

11 Jun 6, 2021
Reply by Frank Capo

"OK."

Roger Häggström replied May 29, 2021 to Piezo pickup failure?

12 Jul 3, 2021
Reply by Roger Häggström

"I bet it's the "Ultra Pure onboard preamp" that is faulty. I always use K&K Pure…"

Roger Häggström replied May 29, 2021 to Piezo pickup failure?

12 Jul 3, 2021
Reply by Roger Häggström

"There is no sound if one of the discs have a short between the hot wire and ground.…"

Roger Häggström replied May 26, 2021 to Piezo pickup failure?

12 Jul 3, 2021
Reply by Roger Häggström

"I see a high probability for burned fingers. Just a light touch of the copper thread…"

Roger Häggström replied May 14, 2021 to Neck steaming temperature?

16 May 14, 2021
Reply by Roger Häggström

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service