FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"HI Joe, We use Sperzel Trim locs as our standard tuner and we also retro fit them to…"

Russell Vance replied Dec 27, 2018 to Locking tuners

 5 Dec 28, 2018
Reply by joe butkins

"hi Danny, rather underwhelming response to your queries eh, Carbon fiber and composi…"

Russell Vance replied Dec 22, 2018 to Newbie, curious about carbon fiber

 3 Dec 26, 2018
Reply by Mark Fogleman

"Hi Kevin, Mark's right on the money here, blade wobble is the killer in domestic tab…"

Russell Vance replied Nov 8, 2018 to Table saw crosscut sled for fret slotting

 4 Nov 8, 2018
Reply by Russell Vance

"Hi Kevin, Max length of cut is going to be less than 70 mm so its probably overkill…"

Russell Vance replied Nov 7, 2018 to Table saw crosscut sled for fret slotting

 4 Nov 8, 2018
Reply by Russell Vance

"Yes Nic, as I said:  "I cannot source them anywhere else despite my best efforts,". …"

Russell Vance replied Nov 3, 2018 to brass insert search

 6 Nov 3, 2018
Reply by Russell Vance

"HI Nic,  This is the address and a screen capture to get you started, these are not…"

Russell Vance replied Oct 31, 2018 to brass insert search

 6 Nov 3, 2018
Reply by Russell Vance

"Hi Nic, Yep, we use them in our Artisan 400 series.  I’ll get back to you ASAP. They…"

Russell Vance replied Oct 31, 2018 to brass insert search

 6 Nov 3, 2018
Reply by Russell Vance

"Hi Dave, Yes I would anticipate problems with maple to mahogany and to me they are m…"

Russell Vance replied Oct 30, 2018 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

"Hi Dave, yes it’s 3 or 4 layers of our own machined veneer which is bent with steam/…"

Russell Vance replied Oct 21, 2018 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

"Hi Paul,  lack of info here:  trussrod?   Neck thickness type?  Fingerboard thicknes…"

Russell Vance replied Oct 19, 2018 to Gluing bowed fret board to neck

 1 Oct 19, 2018
Reply by Russell Vance

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service