FRETS.NET

Roger Häggström's Discussions (579)

Discussions Replied To (533) Replies Latest Activity

"I might as well describe my method in more detail too. I don't use a truss rod when…"

Roger Häggström replied May 6, 2021 to Truss Rods

6 May 9, 2021
Reply by Mark McLean

"Yes, the truss rod gives stiffness to the neck with an added possibility to change t…"

Roger Häggström replied May 5, 2021 to Truss Rods

6 May 9, 2021
Reply by Mark McLean

"I would replace/reglue both the bridge plate and the bridge to keep the top flat aft…"

Roger Häggström replied Mar 21, 2021 to Deformed Plywood Top and Plywood Bridge Plate

23 Feb 17, 2022
Reply by Taffy Evans

"Sounds like a plan. Getting the top wet and clamping until dry is also a way to stra…"

Roger Häggström replied Mar 20, 2021 to Deformed Plywood Top and Plywood Bridge Plate

23 Feb 17, 2022
Reply by Taffy Evans

"Let us know how it turned out!"

Roger Häggström replied Mar 7, 2021 to California Strat Neck Color Match

4 Mar 7, 2021
Reply by Eric Jones

"You could try Potassium permanganate. It's a quick oxidizing chemical making maple "…"

Roger Häggström replied Mar 7, 2021 to California Strat Neck Color Match

4 Mar 7, 2021
Reply by Eric Jones

"I typically add plenty of water to the wood and then let it dry for a couple of days…"

Roger Häggström replied Jan 3, 2021 to Cupped Back Halves

1 Jan 3, 2021
Reply by Roger Häggström

"You are correct about the "stick", I'm from Sweden and I think I used the wrong word…"

Roger Häggström replied Dec 3, 2020 to Frank's Solution for Bulging Sides Q.

5 Dec 3, 2020
Reply by Greg Mirken

"My jig in action. The bottom has a rosewood stick added in the middle. There is an a…"

Roger Häggström replied Dec 3, 2020 to Frank's Solution for Bulging Sides Q.

5 Dec 3, 2020
Reply by Greg Mirken

"I use the same method, the only difference is that I use wooden blocks and parts of…"

Roger Häggström replied Dec 3, 2020 to Frank's Solution for Bulging Sides Q.

5 Dec 3, 2020
Reply by Greg Mirken

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service