FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Grab it quick and at the end of the financial year you can rub it down for a "clean…"

Russell Vance replied Apr 27, 2010 to 5/16" thick slate?

 6 Apr 27, 2010
Reply by Tim Mace

"Didn't notice this post before - you can keep going down past the template and use t…"

Russell Vance replied Apr 26, 2010 to Router Bit Search

 18 May 1, 2010
Reply by Pete Cyr

"Probably because this requires a plunge router bit and plunging a half inch bit is m…"

Russell Vance replied Apr 26, 2010 to Router Bit Search

 18 May 1, 2010
Reply by Pete Cyr

"No, there is normally a small step (about a mm) between the cutter platform and the…"

Russell Vance replied Apr 25, 2010 to Router Bit Search

 18 May 1, 2010
Reply by Pete Cyr

"Could be heap of things but, to cut short a long dissertation and also help you save…"

Russell Vance replied Apr 23, 2010 to Elements of differences in fingerboard feel

 4 May 19, 2010
Reply by Frank Bugbee

"Yep, the screw to ask for is a Teck/Tech/Tec screw used for panel work - they come i…"

Russell Vance replied Apr 22, 2010 to Neck Reglue approach

 6 May 1, 2010
Reply by FRANK

"HI guys, what to charge?.....for a first job, to be fair regarding the hours worked…"

Russell Vance replied Apr 22, 2010 to What to charge for first job?

 5 Apr 23, 2010
Reply by John Cartwright

"I believe it was a hood ornament off a 1928 Duesenburgh (juuuust kidding!).........R…"

Russell Vance replied Apr 20, 2010 to Unidentified pickup.

 14 Apr 26, 2010
Reply by R.J. Fulton

"Some of the guys recall well what has been said before and the discussions sometime…"

Russell Vance replied Apr 5, 2010 to FAQ

 3 Apr 7, 2010
Reply by Jay Peterson

"Have enclosed a few of our things for inspiration - new peghead facings are easy, lo…"

Russell Vance replied Mar 29, 2010 to First broken headstock repair question

 18 Aug 31, 2011
Reply by Kerry Krishna

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service