FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Trying to build without the proper tools and equipment. Imagine if your new surgeon…"

Russell Vance replied Mar 29, 2010 to most common goof up

 19 Apr 15, 2010
Reply by FRANK

"Sims Custom Shop. www.simscustomshop.com - contact them via their website. There are…"

Russell Vance replied Mar 27, 2010 to RG560 Ebanez Elc. Guitar Sticker

 5 Mar 28, 2010
Reply by William F.Eden

"Thanks, Bob, nice to hear a bit of clear thinking on this vexing subject - I find it…"

Russell Vance replied Mar 24, 2010 to Are there wolf notes on classical guitars and is it the same as unwanted resonance

 48 Apr 1, 2010
Reply by Mark Dobbins

"Also sound like the lacquer coats were a bit thick for the temperature to allow gass…"

Russell Vance replied Mar 23, 2010 to Soft lacquer?

 6 Mar 25, 2010
Reply by Ned Knepp

"Bill Eden giving away trade secrets again! Sealing the binding before staining the a…"

Russell Vance replied Mar 22, 2010 to Keeping the stain off of the binding?

 5 Mar 23, 2010
Reply by Pierre-Antoine Roiron

"I use it from time to time as do my colleagues in the furniture industry - basically…"

Russell Vance replied Mar 22, 2010 to Anbody used this?

 6 Mar 22, 2010
Reply by Russell Vance

"OK, the composition of the finish is variable - mostly a stain/dye shader which goes…"

Russell Vance replied Mar 20, 2010 to Gibson Head Stock Black; Paint or Stain?

 1 Mar 20, 2010
Reply by Russell Vance

"Just drill the angled hole from under the bridge to the cavity (1/16 or 3/16 long bi…"

Russell Vance replied Mar 17, 2010 to Too simple a wiring question for this forum...

 14 Mar 21, 2010
Reply by Rob Mercure

"Grahame, firstly , buy one very old horse......... Don't get too wound up about the…"

Russell Vance replied Mar 16, 2010 to Titebond for bridges?

 22 Mar 16, 2010
Reply by Grahame Myers

"What does thickness taper mean?....does it mean you wish to make the board non-paral…"

Russell Vance replied Mar 15, 2010 to Thickness tapering a Classical Guitar Finger Board

 5 Mar 16, 2010
Reply by David Payne

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service