FRETS.NET

Tim Mace's Discussions (462)

Search Forum

View

Discussions Replied To (448) Replies Latest Activity

"Why not glue both up at the same time using the brace for pressure also ? All should…"

Tim Mace replied Oct 24, 2013 to Quick question - gluing order

 6 Oct 25, 2013
Reply by Hesh Breakstone

"I was think the same as Paul but don't know if it's an aberration in the pic..."

Tim Mace replied Oct 10, 2013 to Arch Top Neck Removal

 7 Oct 11, 2013
Reply by Andrew

"I'd consider something like the attached pic!!Stefan Sobell has the right idea....ca…"

Tim Mace replied Oct 7, 2013 to Building a 12 string- suggestions for top and bracing?

 7 Oct 10, 2013
Reply by Donald A. Fortune

"used to have 6 of these on my Martin but they had been modified for reasons unknown…"

Tim Mace replied Oct 2, 2013 to Looking for 1 rosewood bridge pin

 7 Oct 2, 2013
Reply by Tim Mace

"btw...all steel strings...(C)42,(G)32, and figure out which trebs you like plus expe…"

Tim Mace replied Sep 27, 2013 to Balalaika

 5 Sep 27, 2013
Reply by John McDonald

"My McIntyre as of 2day.........."

Tim Mace replied Sep 26, 2013 to Balalaika

 5 Sep 27, 2013
Reply by John McDonald

"I added a 4th string to my handmade McIntyre and tune it to CGDA and it plays great.…"

Tim Mace replied Sep 26, 2013 to Balalaika

 5 Sep 27, 2013
Reply by John McDonald

"noa.....that's much closer to mahog"

Tim Mace replied Sep 22, 2013 to Is this koa?

 5 Sep 22, 2013
Reply by Tim Mace

"don't know if it's still there but here it was.........."

Tim Mace replied Sep 17, 2013 to Doc's McIntyre Guitar

 3 Sep 17, 2013
Reply by Tim Mace

"no pun intended but I'd scarf up that neck on Ebay..... "

Tim Mace replied Sep 16, 2013 to Re-Repairing a Bad Headstock Repair

 24 Sep 16, 2013
Reply by Kerry Krishna

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service