FRETS.NET

Paul Hostetter's Discussions (265)

Discussions Replied To (264) Replies Latest Activity

"Assuming you are referring to the photo above, it evidences a belly bridge which Gib…"

Paul Hostetter replied Dec 4, 2014 to 1930's Gibson L00 has elevated fretboard ?

12 Dec 4, 2014
Reply by Paul Hostetter

"Get it fixed down Route 66. I know it’s is 4 hours away, but there are several good…"

Paul Hostetter replied Dec 1, 2013 to D16 RGT neck shape.

6 Dec 13, 2013
Reply by Erny cherbak

"Glad to hear it finally worked. I think what’s going on is that the heat softens the…"

Paul Hostetter replied Dec 1, 2013 to warped Lyon Healy pickguard

8 Dec 1, 2013
Reply by David Farmer

"Too bad. The original bridge is not worth the effort. But if (and I am assuming it's…"

Paul Hostetter replied Jul 24, 2013 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

25 Jul 28, 2013
Reply by Robbie Collins

"You'll be glad it's gone. All that weight built into the bridge area, if left there…"

Paul Hostetter replied Jul 23, 2013 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

25 Jul 28, 2013
Reply by Robbie Collins

"It's all on my page: http://www.lutherie.net/B-25_bridge.html. Every detail. The "sa…"

Paul Hostetter replied Jul 23, 2013 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

25 Jul 28, 2013
Reply by Robbie Collins

"I go most of the way with files and then go further with a sanding block with 400. I…"

Paul Hostetter replied Jun 11, 2013 to Fret end beveling and filing drama

10 Jul 19, 2013
Reply by tadej bratkovic

"Snakeheads have worm-under machines. I think he did the right thing."

Paul Hostetter replied Jun 2, 2013 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"I'm sorry, cup? I think it's time for a photo. This doesn't tell me anything useful."

Paul Hostetter replied May 29, 2013 to Gibson J 50 structural repairs

42 Jun 1, 2013
Reply by Paul Verticchio

"It's better to date a Gibson by the Factory Order Number (FON) than the serial numbe…"

Paul Hostetter replied May 29, 2013 to Gibson J 50 structural repairs

42 Jun 1, 2013
Reply by Paul Verticchio

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service