FRETS.NET

Len Biglin's Discussions (573)

Discussions Replied To (460) Replies Latest Activity

"Hi Dave , I assumed that the rod was threaded into the anchor , so I wanted to cut i…"

Len Biglin replied Sep 24 to Removing Fender style truss rods

6 Sep 24
Reply by Dave Sparrow

"Hi Dave , yes I have done this , I drilled down through the rod from the back , righ…"

Len Biglin replied Sep 23 to Removing Fender style truss rods

6 Sep 24
Reply by Dave Sparrow

"Thanks Mike , there is a gap at the end of dovetail but you cant access it , except…"

Len Biglin replied Sep 17 to Gretsch Acoustic reset

6 Sep 19
Reply by Roger Häggström

"Gretsch Rancher , note the steam needle has to go in 15th slot and 1/2" in from fret…"

Len Biglin replied Sep 17 to Neck Re-Set Gallery

151 Sep 17
Reply by Len Biglin

"Thanks Mike , I was starting to feel overlooked ha ha . anyway I had to go for it ,…"

Len Biglin replied Sep 16 to Gretsch Acoustic reset

6 Sep 19
Reply by Roger Häggström

"Thanks Jim your input is valuable here , I didn't consider humidity because we are b…"

Len Biglin replied Sep 2 to Old A Style Mandolin.

4 Sep 3
Reply by jbbancroft

"if the line of the frets is above the wood of the bridge then its overset , meaning…"

Len Biglin replied May 17 to Measuring the gap from the top of the 12th fret to the bottom of a straightedge to determine the need for a neck reset.

8 May 18
Reply by Jeff Bolek

"I didn't think about that , no there were no steam holes , nor drill scars in the ca…"

Len Biglin replied Apr 23 to OM 42 reset question.

11 Apr 23
Reply by Len Biglin

"Dont Martin start with a neck and a block that fit , then build the guitar around th…"

Len Biglin replied Apr 23 to OM 42 reset question.

11 Apr 23
Reply by Len Biglin

"I cant believe the shims !!"

Len Biglin replied Apr 20 to OM 42 reset question.

11 Apr 23
Reply by Len Biglin

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service