FRETS.NET

Tom Mitchell's Discussions (53)

Discussions Replied To (44) Replies Latest Activity

"I appreciate everyone's comments so far.  They have been very helpful and thought pr…"

Tom Mitchell replied Apr 1, 2012 to Epiphone EJ-300CE needs peghead repair - advice, please!

19 Apr 2, 2012
Reply by Christian Johnson

"I use the same technique that Jeff mentioned, and it works great..  I use two capos.…"

Tom Mitchell replied Nov 8, 2011 to How can I remove the saddle without removing the strings?

10 May 20, 2014
Reply by Ron frazier

"I have two peghead repairs to do (my own guitars, I'm still a novice at this, and th…"

Tom Mitchell replied Nov 3, 2011 to Fishy Solution?

9 Nov 9, 2011
Reply by Gabriel Dehoyos

"Oh Lord, say it ain't so! My wife's Korean EJ-300CE has a broken peghead that I need…"

Tom Mitchell replied Nov 3, 2011 to Epiphone EJ300-S neck joint?

5 Nov 4, 2011
Reply by David Collins

"I heard that Sam Hutton used HHG to put Tolex on Fender amplifiers "back in the day"…"

Tom Mitchell replied Oct 27, 2011 to Gluing on a front.

19 Oct 27, 2011
Reply by Tom Mitchell

"Everyone who has posted here has developed thier own nuanced approach, and all are e…"

Tom Mitchell replied Oct 22, 2011 to What is the best way to shine-up frets, fine steel wool, or fine sand paper?

10 Oct 23, 2011
Reply by Arthur Sweeney

"I'm planning to build a J-185 style guitar, and figure I'll need to make about 30 sp…"

Tom Mitchell replied Oct 20, 2011 to Gluing on a front.

19 Oct 27, 2011
Reply by Tom Mitchell

"Freakin' brilliant.  I'm hitting a few moving sales and then I'll be "borrowing" you…"

Tom Mitchell replied Oct 20, 2011 to Gluing on a front.

19 Oct 27, 2011
Reply by Tom Mitchell

"Yes, 104 is 0.1 mf"

Tom Mitchell replied Oct 19, 2011 to tone cap question

11 Oct 20, 2011
Reply by David Reilly

"Sorry, I visualized the circuit incorrectly.  After re-reading, it's not what I thou…"

Tom Mitchell replied Oct 19, 2011 to tone cap question

11 Oct 20, 2011
Reply by David Reilly

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service