FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

"I know, Frank, and I've watched you do it. Didn't work well for me [and I don't reme…"

Greg Mirken replied Dec 7, 2020 to Question about neck dovetail shims

9 Dec 14, 2020
Reply by onewent

"What happened to this instrument? Did it get baked? Is it dry as a bone? Before you…"

Greg Mirken replied Dec 6, 2020 to Order of Operations Advice

5 Dec 7, 2020
Reply by Bay Rum Around

"If the open center seam all lines up nicely I would tend to that first."

Greg Mirken replied Dec 4, 2020 to Order of Operations Advice

5 Dec 7, 2020
Reply by Bay Rum Around

"The only thing I can add is that you have to be patient. It took years for the sides…"

Greg Mirken replied Dec 3, 2020 to Frank's Solution for Bulging Sides Q.

5 Dec 3, 2020
Reply by Greg Mirken

"Good call, Mark. Yeah, your bevels are fine; make a new nut. "

Greg Mirken replied Nov 17, 2020 to Fret Slots too Large?

13 Jan 15, 2021
Reply by wood addict

"Ebony fretboard? Might be OK. Indian Rosewood? Maybe not. You might run a bit of hot…"

Greg Mirken replied Nov 17, 2020 to Fret Slots too Large?

13 Jan 15, 2021
Reply by wood addict

"What was the verdict, Dave?"

Greg Mirken replied Oct 25, 2020 to Tricky Crack Diagnosis Issue

8 Oct 26, 2020
Reply by Dave Domizi

"Well, as long as you're trying to wick liquids into the crack, why not just try to w…"

Greg Mirken replied Oct 12, 2020 to Tricky Crack Diagnosis Issue

8 Oct 26, 2020
Reply by Dave Domizi

"It's certainly an unusual place for a lacquer check. Does the instrument have other…"

Greg Mirken replied Oct 9, 2020 to Tricky Crack Diagnosis Issue

8 Oct 26, 2020
Reply by Dave Domizi

"Just because the sound seems to come from the bridge, don't leave out the neck, head…"

Greg Mirken replied Oct 2, 2020 to Finding mechanical rattles in classical guitars

4 Oct 4, 2020
Reply by Eric Gleason

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service